SC18IS601IBS,151 NXP Semiconductors, SC18IS601IBS,151 Datasheet - Page 13

• Manufacturer Part Number: SC18IS601IBS,151
• Description: IC SPI TO I2C BUS 24-HVQFN
• Manufacturer: NXP Semiconductors

Specifications of SC18IS601IBS,151

• Package / Case: 24-VQFN Exposed Pad, 24-HVQFN, 24-SQFN, 24-DHVQFN
• Controller Type: I²C Bus Controller
• Interface: SPI
• Voltage - Supply: 2.4 V ~ 3.6 V
• Current - Supply: 11mA
• Operating Temperature: -40°C ~ 85°C
• Mounting Type: Surface Mount
• Maximum Operating Frequency: 12 MHz
• Maximum Operating Temperature: + 85 C
• Minimum Operating Temperature: - 40 C
• Mounting Style: SMD/SMT
• Supply Voltage (max): 3.6 V
• Supply Voltage (min): 2.4 V
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• For Use With: 568-3511 - DEMO BOARD SPI TO I2C
• Lead Free Status / Rohs Status: Lead free / RoHS Compliant
• Other names: 568-4710; 935286979151; SC18IS601IBS-S

NXP Semiconductors
SC18IS600_601_5
Product data sheet
Fig 13. Write N bytes to I
SPI host sends
COMMAND
SCLK
MOSI
0x00
CS
6.6.1 Write N bytes to I
6.6 SPI message format
OF BYTES
NUMBER
command 0x00
The SPI host issues the write command by sending a 0x00 command followed by the total
number of bytes (maximum 96 bytes excluding the address) to send and an I
device address followed by I
and ending with the last byte (data byte N). Once the SPI host issues this command, the
SC18IS600/601 will access the I
bytes.
When the I
on the INT pin, and the ‘transaction completed’ status can be read in I2CStat.
Note that the third byte sent by the host is the device I
SC18IS600/601 will ignore the least significant bit so a write will always be performed
even if the least significant bit is a ‘1’.
Fig 12. SPI single master multiple slaves configuration
2
C-bus slave device
SLAVE ADDRESS
+ W
number of bytes D[7:0]
2
C-bus write transaction has successfully finished, and interrupt is generated
master
2
BYTE 1
C-bus slave device
DATA
Rev. 05 — 28 July 2008
SPICLK
slave address A[7:1]
2
PORT
PORT
C-bus data bytes, beginning with the first byte (data byte 1)
2
C-bus slave device and start sending the I
BYTE N
DATA
MISO
MOSI
0
data byte 1
2
C-bus slave address. The
slave
slave
SCLK
CS
SCLK
CS
SC18IS600/601
SC18IS600/601
OTHER SPI
DEVICE
002aab717
SPI to I
data byte N
© NXP B.V. 2008. All rights reserved.
2
C-bus interface
2
2
C-bus data
002aab718
C-bus slave
13 of 30