DS80C320-MCG+ Dallas Semiconductor, DS80C320-MCG+ Datasheet - Page 7

• Manufacturer Part Number: DS80C320-MCG+
• Description: Microcontroller, 8051 Comp., 4 8-Bit I/O Ports, 64K ROM/RAM, 25 MHz, 5 V, PDIP40
• Manufacturer: Dallas Semiconductor

Specifications of DS80C320-MCG+

• Eeprom Memory: 0 Bytes
• Input Output: 32
• Interface: UART
• Memory Type: ROMless
• Number Of Bits: 8
• Package Type: 40-pin PDIP
• Programmable Memory: 0 Bytes
• Ram Size: 256 Bytes
• Speed: 25 MHz
• Timers: 3-16-bit
• Voltage, Range: 4.25-5.5 V
• Lead Free Status / Rohs Status: RoHS Compliant part Electrostatic Device

DS80C320/DS80C323 High-Speed/Low-Power Microcontrollers
Figure 2. Comparative Timing of the DS80C320/DS80C323 and 80C32
DS80C320/DS80C323 TIMING
STANDARD 80C32 TIMING
HIGH-SPEED OPERATION
The DS80C320/DS80C323 are built around a high-speed, 80C32-compatible core. Higher speed comes
not just from increasing the clock frequency but also from a newer, more efficient design.
In this updated core, dummy memory cycles have been eliminated. In a conventional 80C32, machine
cycles are generated by dividing the clock frequency by 12. In the DS80C320/DS80C323, the same
machine cycle is performed in 4 clocks. Thus the fastest instruction, one machine cycle, is executed three
times faster for the same crystal frequency. Note that these are identical instructions. Figure 2 shows a
comparison of the timing differences. The majority of instructions will see the full 3-to-1 speed
improvement. Some instructions will get between 1.5X and 2.4X improvement. Note that all instructions
are faster than the original 80C51. Table 1 shows a summary of the instruction set, including the speed.
The numerical average of all op codes is approximately a 2.5-to-1 speed improvement. Individual
programs are affected differently, depending on the actual instructions used. Speed-sensitive applications
would make the most use of instructions that are three times faster. However, the sheer number of 3-to-1
improved op codes makes dramatic speed improvements likely for any code. The Dual Data Pointer
feature also allows the user to eliminate wasted instructions when moving blocks of memory.
7 of 40