DSPIC30F4011-30I/P Microchip Technology Inc., DSPIC30F4011-30I/P Datasheet - Page 15

• Manufacturer Part Number: DSPIC30F4011-30I/P
• Description: 16 BIT MCU/DSP 40LD 30MIPS 48 KB FLASH
• Manufacturer: Microchip Technology Inc.
• Type: DSPr

Specifications of DSPIC30F4011-30I/P

• A/d Inputs: 9-Channels, 10-Bit
• Comparators: 4
• Cpu Speed: 30 MIPS
• Eeprom Memory: 1K Bytes
• Input Output: 30
• Interface: CAN, I2C/SPI/UART, USART
• Ios: 30
• Memory Type: Flash
• Number Of Bits: 16
• Package Type: 40-pin PDIP
• Programmable Memory: 48K Bytes
• Ram Size: 2K Bytes
• Timers: 5-16-bit, 2-32-bit
• Voltage, Range: 2.5-5.5
• Lead Free Status / Rohs Status: RoHS Compliant part Electrostatic Device

1.0
This document contains device family specific informa-
tion for the dsPIC30F family of Digital Signal Controller
(DSC) devices. The dsPIC30F devices contain exten-
sive Digital Signal Processor (DSP) functionality within a
high
architecture.
 2004 Microchip Technology Inc.
Note: This data sheet summarizes features of this group
of dsPIC30F devices and is not intended to be a complete
reference source. For more information on the CPU,
peripherals, register descriptions and general device
functionality, refer to the dsPIC30F Family Reference
Manual (DS70046). For more information on the device
instruction set and programming, refer to the dsPIC30F
Programmer’s Reference Manual (DS70030).
performance
DEVICE OVERVIEW
16-bit
microcontroller
(MCU)
Preliminary
Figure 1-1 shows a sample device block diagram.
Note:
The device(s) depicted in this block dia-
gram are representative of the correspond-
ing device family. Other devices of the
same family may vary in terms of number
of pins and multiplexing of pin functions.
Typically, smaller devices in the family con-
tain a subset of the peripherals present in
the device(s) shown in this diagram.
dsPIC30F
DS70082G-page 13