ADC10065CIMT/HALF National Semiconductor, ADC10065CIMT/HALF Datasheet - Page 4

• Manufacturer Part Number: ADC10065CIMT/HALF
• Manufacturer: National Semiconductor

Specifications of ADC10065CIMT/HALF

• Lead Free Status / Rohs Status: Supplier Unconfirmed

www.national.com
ANALOG POWER
DIGITAL POWER
16–20, 23–
3, 11, 14
Pin No.
2, 9, 10
27
22
21
Symbol
D0–D9
V
V
V
V
DDIO
SSIO
DDA
SSA
Equivalent Circuit
4
Digital output data. D0 is the LSB and D9 is the MSB of the binary
output word.
Positive analog supply pins. These pins should be connected to a
quiet 3.0V source and bypassed to analog ground with a 0.1 µF
monolithic capacitor located within 1 cm of these pins. A 4.7 µF
capacitor should also be used in parallel.
Ground return for the analog supply.
Positive digital supply pins for the ADC10065’s output drivers. This
pin should be bypassed to digital ground with a 0.1 µF monolithic
capacitor located within 1 cm of this pin. A 4.7 µF capacitor should
also be used in parallel. The voltage on this pin should never
exceed the voltage on V
The ground return for the digital supply for the output drivers. This
pin should be connected to the ground plane, but not near the
analog circuitry.
DDA
Description
by more than 300 mV.