R7A-CNA02R Omron, R7A-CNA02R Datasheet - Page 64
![no-image](/images/manufacturer_photos/0/4/494/omron_sml.jpg)
R7A-CNA02R
Manufacturer Part Number
R7A-CNA02R
Description
CONN ENCODER FOR SERVOMOTOR END
Manufacturer
Omron
Datasheet
1.R7A-CNA02R.pdf
(252 pages)
Specifications of R7A-CNA02R
Lead Free Status / Rohs Status
Lead free / RoHS Compliant
Other names
R7ACNA02R
- Current page: 64 of 252
- Download datasheet (4Mb)
●
• SMARTSTEP A-series Servomotors use rare earth magnets (neodymium-iron magnets). The tem-
• Generally, in a mechanical system, when the temperature drops the friction torque increases and
• An increase in load friction torque visibly increases load inertia. Therefore, even if the Servo Driver
2-4-3 Encoder Specifications
2-38
Standard Models and Specifications
Encoder method
Number of output pulses
Power supply voltage
Power supply current
Maximum rotation speed
Output signals
Output interface
Serial communications data
Serial communications method
perature coefficient for these magnets is approximately –0.13%/ ° C. As the temperature drops, the
Servomotor’s momentary maximum torque increases, and as the temperature rises the Servomo-
tor’s momentary maximum torque decreases. When the normal temperature of 20 ° C and –10 ° C
are compared, the momentary maximum torque increases by approximately 4%. Conversely, when
the magnet warms up to 80 ° C from the normal temperature of 20 ° C, the momentary maximum
torque decreases by approximately 8%.
the load torque becomes larger. For that reason, overloading may occur at low temperatures. In
particular, in systems which use reduction gear, the load torque at low temperatures may be nearly
twice the load torque at normal temperatures. Check with a current monitor to see whether over-
loading is occurring at low temperatures, and how much the load torque is. Likewise, check to see
whether there abnormal Servomotor overheating or alarms are occurring at high temperatures.
parameters are adjusted at a normal temperature, there may not be optimal operation at low tem-
peratures. Check to see whether there is optimal operation at low temperatures too.
Servomotor and Mechanical System Temperature Characteristics
Item
Optical encoder (incremental)
Phase A, B: 2,000 pulses/revolution
Phase Z: 1 pulse/revolution
5 V DC ± 5%
150 mA max.
4,500 r/min
+A, –A, +B, –B, +S, –S
Conforming to EIA RS-422A.
Output based on AM26LS31CN or equivalent.
Phase Z, poll sensor, phases U, V, W
Combined communications method using phases A, B, and S.
Cylinder-style Servomotors
Specification
Magnetic encoder
(incremental)
Flat-style Servomotors
Chapter 2