NS12-ATT01 Omron, NS12-ATT01 Datasheet - Page 50
![no-image](/images/manufacturer_photos/0/4/494/omron_sml.jpg)
NS12-ATT01
Manufacturer Part Number
NS12-ATT01
Description
NT625C/NT631/NT631C TO NS10
Manufacturer
Omron
Datasheet
1.NS12-TS01B-V2.pdf
(334 pages)
Specifications of NS12-ATT01
Lead Free Status / Rohs Status
Lead free / RoHS Compliant
Other names
NS12ATT01
- Current page: 50 of 334
- Download datasheet (7Mb)
2-2 Part Names and Functions
2-16
Touch Panel (NS15)
To ensure correct input operations, create touch switches so that they consist of at least 32 x
32 dots.
The touch switches on the front panel of the PT are used to perform input operations. Press
the touch switches to perform operations such as switching screens and sending bit status to
the host.
Reference
Precautions
for Safe Use
Precautions
for Correct Use
Function
performed
The NS15-TX01@-V2 uses an analog touch panel.
Never press more than two points on the panel at a
time. Otherwise, it may activate a switch some-
where between the two points.
• Pressing Three Switches Simultaneously
Minimum touch switch frame
When the positions of multiple touch switches are set as shown in the example and
three switches are pressed simultaneously, the touch switches will malfunction due to
structural characteristics.
Position the touch switches carefully. In the example shown below, switches have been
created in positions A and B, and at points C and D, where the vertical and horizontal
lines through A and B intersect.
When a functional object is pressed, its function is performed.
D
A
• Press the touch switches with a pressure of 30 N max.
• Do not press the touch switches when the backlight is not lit or when there is
• Check system safety before pressing the touch switches.
• Inputs may not be recognized if the touch switches are pressed in rapid suc-
• A touch position detection error of up to 10 pixels may occur due to the pre-
• If you touch a point on the panel away from any object and then slide your
no display.
cession. Check that one input operation has finished before performing the
next one.
cision of the NS15-TX01 @ -V2 touch panel. Always take this into account
when positioning functional objects on the panel so adjoining objects will not
be activated by mistake.
finger on the panel until it rests on a functional object on the NS15-TX01 @ -
V2, that functional object will not be activated. You must remove your finger
completely from the panel and then touch the functional object directly to ac-
tivate that object.
Functional objects can be created combining
minimum size switches.
C
B
• If touch switches A, B, and C are turned ON
• In the same way, if touch switches A, B, and D
simultaneously, switch D may also turn ON due
to the structure of the touch panel.
are turned ON simultaneously, switch C may
also turn ON.
Resolution
NS15: 1,024 × 1,024
The NS15 has no minimum switch size
because the touch panel is analog.