PCA9600DP,118 NXP Semiconductors, PCA9600DP,118 Datasheet - Page 26

• Manufacturer Part Number: PCA9600DP,118
• Description: IC BUS BUFFER DUAL BIDIR 8-TSSOP
• Manufacturer: NXP Semiconductors
• Type: Bufferr

Specifications of PCA9600DP,118

• Package / Case: 8-TSSOP
• Tx/rx Type: I²C Logic
• Delay Time: 100ns
• Capacitance - Input: 10pF
• Voltage - Supply: 2.5 V ~ 15 V
• Current - Supply: 7.3mA
• Mounting Type: Surface Mount
• Logic Family: SDA, SCL
• Supply Voltage (max): 15 V
• Supply Voltage (min): 2 V
• Maximum Operating Temperature: + 85 C
• Mounting Style: SMD/SMT
• Interface: I2C Bus
• Maximum Power Dissipation: 300 mW
• Minimum Operating Temperature: - 40 C
• Output Current: 2 mA
• Output Voltage: 15 V
• Supply Current: 5.5 mA
• Logic Type: Bidirectional Bus Buffer
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• For Use With: 568-4704 - DAUGHTER CARD PCA9600 FOR OM6275
• Lead Free Status / Rohs Status: Lead free / RoHS Compliant
• Other names: 568-4716-2; 935285244118; PCA9600DP-T; PCA9600DP-T

NXP Semiconductors
PCA9600_4
Product data sheet
12.4 Reflow soldering
Key characteristics in reflow soldering are:
Table 8.
Table 9.
Moisture sensitivity precautions, as indicated on the packing, must be respected at all
times.
Studies have shown that small packages reach higher temperatures during reflow
soldering, see
Package thickness (mm)
< 2.5
Package thickness (mm)
< 1.6
1.6 to 2.5
> 2.5
•
•
•
2.5
Lead-free versus SnPb soldering; note that a lead-free reflow process usually leads to
higher minimum peak temperatures (see
reducing the process window
Solder paste printing issues including smearing, release, and adjusting the process
window for a mix of large and small components on one board
Reflow temperature profile; this profile includes preheat, reflow (in which the board is
heated to the peak temperature) and cooling down. It is imperative that the peak
temperature is high enough for the solder to make reliable solder joints (a solder paste
characteristic). In addition, the peak temperature must be low enough that the
packages and/or boards are not damaged. The peak temperature of the package
depends on package thickness and volume and is classified in accordance with
Table 8
SnPb eutectic process (from J-STD-020C)
Lead-free process (from J-STD-020C)
and
Figure
9
Rev. 04 — 11 November 2009
28.
Package reflow temperature ( C)
Volume (mm
< 350
235
220
Package reflow temperature ( C)
Volume (mm
< 350
260
260
250
3
3
)
)
Figure
350 to 2000
260
250
245
28) than a SnPb process, thus
220
220
Dual bidirectional bus buffer
350
> 2000
260
245
245
PCA9600
© NXP B.V. 2009. All rights reserved.
26 of 30