SP5004EGP Xeltek, SP5004EGP Datasheet - Page 29

• Manufacturer Part Number: SP5004EGP
• Description: SUPERPRO 5004EGP PROGRAMMER
• Manufacturer: Xeltek
• Series: SuperPro®r
• Type: Gang-Universal Programmerr

Specifications of SP5004EGP

• Contents: Programmer, AC Adapter, Cable, CD
• Lead Free Status / Rohs Status: Lead free / RoHS Compliant
• For Use With/related Products: EEPROM, EPROM, FLASH, MCU, NVRAM, PLD
• Other names: 415-1051

manual for the meanings of the buffers.
The two data types of the device are Data (HEX/ASCII) and Fuse.
• For most EPROM and SCM, the data type is Data (HEX/ASCII).
• The data type for PLD device is Fuse.
After you select the device, the software automatically identifies the data buffer
type. You can review the buffer data types if you open the Edit Buffer screen.
Refer to the Buffer Edit Screen on page 32 for more information.
When some file data are loaded into the data buffer, the following rules apply:
• With a HEX/ASCII data buffer (EPROM, MCU etc.), the system assumes that 8
• With a JEDEC buffer (PLD/PAL), the system considers the lowest bit (1 bit) of
When you select Load File into Buffer from the Setting screen, the system
displays the Load File screen, illustrated below. The red labels refer to the
numbered explanations below.
1. Select the data Buffer name from the drop down list, as illustrated below.
Superpro
bits of the data are valid.
the file data valid.
®
5004GP User’s Guide
29