SP5004EGP Xeltek, SP5004EGP Datasheet - Page 47

• Manufacturer Part Number: SP5004EGP
• Description: SUPERPRO 5004EGP PROGRAMMER
• Manufacturer: Xeltek
• Series: SuperPro®r
• Type: Gang-Universal Programmerr

Specifications of SP5004EGP

• Contents: Programmer, AC Adapter, Cable, CD
• Lead Free Status / Rohs Status: Lead free / RoHS Compliant
• For Use With/related Products: EEPROM, EPROM, FLASH, MCU, NVRAM, PLD
• Other names: 415-1051

• Security encrypts data to make it unreadable.
• Erase_All is the same as Erase.
• Protect_All is the same as Protect.
• Lock_Bit is a protection method. Please refer to the Device Data Manual for the
Device Configuration Word Screen
Important: The device configuration word varies from device to device. Refer to
Some single‐chip microcomputers allow special working modes, such as the
storage area mapping, the watchdog time, the clock, or the encryption. Set these
special modes through the Device Configuration Word option.
The user files contain the configuration words of some devices. When you load
these files, the system automatically loads the configuration words into the
configuration word buffer. However, you must select the configuration words for
some devices manually.
Superpro
– The Protect function protects the data in FLASH chips. You cannot rewrite
detail information about the operations.
Example: Atmel At89C51 has three operation items: Lock_Bit1, Lock_Bit12,
a protected chip until you have removed the protection. Use the Erase
operation to remove the protection. You must use this operation with Dev.
Config and identify the sector. Refer to Identifying the Sector on page 60 for
more information.
®
5004GP User’s Guide
the device data manual for more information about the configuration
words. Set the configuration words according to the requirements of
your target system. Otherwise, you cannot use the device normally
even if it is normal when preparing and verifying the program.
chips cannot be re‐used.
Lock_Bit123. The data manual defines the meaning of each.
47