SP5004EGP Xeltek, SP5004EGP Datasheet - Page 56

• Manufacturer Part Number: SP5004EGP
• Description: SUPERPRO 5004EGP PROGRAMMER
• Manufacturer: Xeltek
• Series: SuperPro®r
• Type: Gang-Universal Programmerr

Specifications of SP5004EGP

• Contents: Programmer, AC Adapter, Cable, CD
• Lead Free Status / Rohs Status: Lead free / RoHS Compliant
• For Use With/related Products: EEPROM, EPROM, FLASH, MCU, NVRAM, PLD
• Other names: 415-1051

Chapter 4 Procedures
This chapter provides information on steps for common procedures.
Programming Procedure
This section presents the operation process for the chip programming, from the
beginning to the end, including the user interface and the device programming
steps.
Before you start to program any devices, make sure that you have correctly
installed the programmer and that the computer is successfully communicating
with the programmer.
It is best to detach management from production so that during production, you
only need to watch the burning process.
Use the administrator mode to set the working environment for the burning
devices. The four modules work the same, including devices, data, and operation
options.
Prepare the Hardware
You can only enter administrator mode if the computer and programmer are
communicating successfully.
Make sure that you have the appropriate adapter for your SMD devices, if
applicable.
Insert the chip correctly. Follow the guidelines of the standard chip insertion
markings near the pin‐driver socket. However, if you select SMD or a device that
requires non‐standard insertion, the system prompts you with the appropriate
chip insertion.
Prepare the Settings
1. Select the Setting icon on the Toolbar. The system displays the Setting Mode
2. Select Administrator and OK.
The system displays the Setting screen.
3. Select the device. Refer to the Select section on page 25 for more information.
4. Load the data into the buffer. Refer to the Load File Screen section on page 28
Superpro
screen.
for more information.
®
5004GP User’s Guide
56