PCF8563P NXP Semiconductors, PCF8563P Datasheet - Page 13

• Manufacturer Part Number: PCF8563P
• Manufacturer: NXP Semiconductors

Specifications of PCF8563P

• Bus Type: Serial (2-Wire, I2C)
• Date Format: DW:DM:M:Y
• Time Format: HH:MM:SS
• Operating Supply Voltage (typ): 2.5/3.3/5V
• Package Type: PDIP
• Operating Supply Voltage (max): 5.5V
• Operating Supply Voltage (min): 1.8V
• Operating Temperature Classification: Industrial
• Operating Temperature (max): 85C
• Operating Temperature (min): -40C
• Pin Count: 8
• Mounting: Through Hole
• Lead Free Status / Rohs Status: Compliant

NXP Semiconductors
PCF8563
Product data sheet
As a consequence of this method, it is very important to make a read or write access in
one go, that is, setting or reading seconds through to years should be made in one single
access. Failing to comply with this method could result in the time becoming corrupted.
As an example, if the time (seconds through to hours) is set in one access and then in a
second access the date is set, it is possible that the time may increment between the two
accesses. A similar problem exists when reading. A roll over may occur between reads
thus giving the minutes from one moment and the hours from the next.
Recommended method for reading the time:
10. Read Century_months.
11. Read Years.
12. Send a STOP condition.
1. Send a START condition and the slave address for write (A2h).
2. Set the address pointer to 2 (VL_seconds) by sending 02h.
3. Send a RESTART condition or STOP followed by START.
4. Send the slave address for read (A3h).
5. Read VL_seconds.
6. Read Minutes.
7. Read Hours.
8. Read Days.
9. Read Weekdays.
Fig 9.
Access time for read/write operations
START
All information provided in this document is subject to legal disclaimers.
SLAVE ADDRESS
Rev. 7 — 23 July 2010
DATA
DATA
t < 1 s
Real-time clock/calendar
STOP
PCF8563
© NXP B.V. 2010. All rights reserved.
013aaa215
13 of 44