ZFSM-201-KIT-1 CALIFORNIA EASTERN LABS, ZFSM-201-KIT-1 Datasheet - Page 20

• Manufacturer Part Number: ZFSM-201-KIT-1
• Manufacturer: CALIFORNIA EASTERN LABS

Specifications of ZFSM-201-KIT-1

• Lead Free Status / Rohs Status: Not Compliant

4.4
Eight different tools are available in the Free Star Pro Test Tool program provided on the CEL
CD and are shown as Tabs in the program’s opening screen.
The RF Evaluation Tab is used to set the module to run in different modes for RF Evaluation
Tests, commonly used for FCC certification or other RF evaluation.
The Packet Error Rate Test is conducted between two evaluation boards, one configured as a
transmitter and the other as a receiver. It sends a defined number of packets (with a defined
message code) from the transmitter to the receiver. The receiver counts the number of packets
received with the same message code and displays the statistics. A demonstration of this
function is given in Section 5.4 of this document.





Idle: Sets the radio to Idle mode where the reference oscillator is operating, but the radio
is neither transmitting nor receiving.
Receive: The radio will continually receive RF messages. In this mode any RF messages
received will be ignored by the processor.
TX Mod: The radio will continually transmit a Modulated signal.
TX UnMod: The radio will continually transmit an Unmodulated signal.
TX PRBS: The radio will continally transmit a Psuedo Random Binary Sequence.
DESCRIPTIONS OF THE MAC TEST TOOLS
4.4.1
4.4.2
Rev B
RF Evaluation Tab
PERT Tab
Figure 12 – Screen, Test Tool – RF Evaluation Modes
Document No. 0006-00-08-00-000
Page 20 of 42