ZFSM-201-KIT-1 CALIFORNIA EASTERN LABS, ZFSM-201-KIT-1 Datasheet - Page 23

• Manufacturer Part Number: ZFSM-201-KIT-1
• Manufacturer: CALIFORNIA EASTERN LABS

Specifications of ZFSM-201-KIT-1

• Lead Free Status / Rohs Status: Not Compliant

The settings tab can be used to query the settings (capacitor values) of the reference oscillator,
or to query the Analog to Digital Converters. See Figure 15.









Data: The message being received; it should agree with the Transmit ‘Data’.
Source Address: The ‘Transceiver ID’ of the evaluation board being used as the
transmitter.
RX’s LQI: The Link Quality Indicator as measured by the receiver (with indicator “light”)
Receive: Starts the reception of packets.
The default XTAL settings are hardcoded into the program and are displayed on turn on.
Clicking the ‘Query XTAL Values’ button will read the actual values in the device and
display them in the drop down boxes. Packets sent and received can be seen in the
Communications Log screen.
By clicking the ‘Start ADC Query’ button the ADC’s connected to the Potentiometers (See
Figure 1) will be continually read (about twice a second). Their values will be updated in
the respective boxes in the GUI.
In addition the MC13224V has the ability to monitor its own power supply from an internal
voltage reference. This value will also be updated in the ADC query.
Clicking the ‘Stop ADC Query’ button will stop the query.
4.4.4
Rev B
4.4.3.2
4.4.4.1
4.4.4.2
Settings Tab
Receiver Section
XTAL Settings
ADC Results
Figure 15 – Screen, Test Tool – Settings
Document No. 0006-00-08-00-000
Page 23 of 42