SC28L92A1B,557 NXP Semiconductors, SC28L92A1B,557 Datasheet - Page 27

• Manufacturer Part Number: SC28L92A1B,557
• Description: IC UART DUAL W/FIFO 44-PQFP
• Manufacturer: NXP Semiconductors
• Series: IMPACTr
• Type: Dual UARTr

Specifications of SC28L92A1B,557

• Number Of Channels: 2, DUART
• Package / Case: 44-MQFP, 44-PQFP
• Features: False-start Bit Detection
• Fifo's: 16 Byte
• Voltage - Supply: 3.3V, 5V
• With Auto Flow Control: Yes
• With False Start Bit Detection: Yes
• With Modem Control: Yes
• With Cmos: Yes
• Mounting Type: Surface Mount
• Data Rate: 0.2304 MBd
• Supply Voltage (max): 3.63 V or 5.5 V
• Supply Voltage (min): 2.97 V or 4.5 V
• Supply Current: 25 mA
• Maximum Operating Temperature: + 85 C
• Minimum Operating Temperature: - 40 C
• Mounting Style: SMD/SMT
• Operating Supply Voltage: 3.3 V or 5 V
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant, Lead free / RoHS Compliant
• Other names: 568-1211; 935263294557; SC28L92A1B

NXP Semiconductors
SC28L92_7
Product data sheet
Table 24.
Table 25.
[1]
Table 26.
[1]
Bit
3
2
1
0
RxINT[2:1] (bits MR0[6] and MR1[6])
FIFOSIZE = 0 (8 bytes)
00
01
10
11
FIFOSIZE = 1 (16 bytes)
00
01
10
11
TxINT[1:0] (bits MR0[5:4])
FIFOSIZE = 0 (8 bytes)
00
01
10
11
FIFOSIZE = 1 (16 bytes)
00
01
10
11
Interrupt fill level must be set when the transmit and receive FIFOs are empty, otherwise the new level takes
effect only after a read or a write to the FIFO.
Interrupt fill level must be set when the transmit and receive FIFOs are empty, otherwise the new level takes
effect only after a read or a write to the FIFO.
Symbol
FIFOSIZE
BAUDRATE
EXTENDED I
TEST2
BAUDRATE
EXTENDED II
MR0A - Mode Register 0 channel A (address 0x0) bit description
Receiver FIFO interrupt fill level
Transmitter FIFO interrupt fill level
Rev. 07 — 19 December 2007
3.3 V/5.0 V Dual Universal Asynchronous Receiver/Transmitter
Description
FIFO size for channel A and channel B. Selects the FIFO depth at
8-byte or 16-byte.
Bits MR0[2:0] are used to select one of the six baud rate groups. See
Table 35
Other combinations of MR0[2:0] should not be used.
0 = 8 bytes
1 = 16 bytes
000 = Normal mode
001 = Extended mode I
100 = Extended mode II
for the group organization.
[1]
[1]
Interrupt condition
1 or more bytes in FIFO (RxRDY)
3 or more bytes in FIFO
6 or more bytes in FIFO
8 bytes in FIFO (RxFULL)
1 or more bytes in FIFO (RxRDY)
8 or more bytes in FIFO
12 or more bytes in FIFO
16 bytes in FIFO (RxFULL)
Interrupt condition
8 bytes empty (TxEMPTY)
4 or more bytes empty
6 or more bytes empty
1 or more bytes empty (TxRDY)
16 bytes empty (TxEMPTY)
8 or more bytes empty
12 or more bytes empty
1 or more bytes empty (TxRDY)
SC28L92
© NXP B.V. 2007. All rights reserved.
…continued
27 of 73