AD9148 Analog Devices, AD9148 Datasheet - Page 63

• Manufacturer Part Number: AD9148
• Manufacturer: Analog Devices

Specifications of AD9148

• Resolution (bits): 16bit
• Dac Update Rate: 1GSPS
• Dac Settling Time: n/a
• Max Pos Supply (v): +3.47V
• Single-supply: No
• Dac Type: Current Out
• Dac Input Format: LVDS,Par

Data Sheet
DEVICE POWER DISSIPATION
The
and CVDD18.
The AVDD33 supply powers the DAC core circuitry. The power
dissipation of the AVDD33 supply rail is independent of the digital
operating mode and sample rate. The current drawn from the
AVDD33 supply rail is typically 98 mA (320 mW) when the
full-scale current of the four main DACs (DAC 1, DAC 2, DAC 3,
and DAC 4) is set to the nominal value of 20 mA. Changing the
full-scale current directly impacts the supply current drawn from
the AVDD33 rail. For example, if the full-scale current of the
four main DACs is changed to 10 mA, the AVDD33 supply
current drops by 40 mA to 58 mA.
The IOVDD voltage supplies the serial port I/O pins (SCLK,
SDIO, SDO, CSB, TCK, TDI, TDO, TMS), the RESET pin, and
the IRQ pin. The voltage applied to the IOVDD pin can range
from 1.8 V to 3.3 V. The current drawn by the IOVDD supply
pin is typically 1 mA.
The DVDD18 supply powers all of the digital signal processing
blocks of the device. The power consumption from this supply
is a function of which digital blocks are enabled and the frequency
at which the device is operating.
The CVDD18 supply powers the clock receiver and clock
distribution circuitry. The power consumption from this
supply varies directly with the operating frequency of the
device. CVDD18 also powers the PLL. The power dissipation
of the PLL is typically 80 mW.
Figure 84 to Figure 89 detail the power dissipation of the
under a variety of operating conditions. All of the graphs are
taken with data being supplied to all four DACs. The power
consumption of the device does not vary significantly with
changes in the coarse modulation mode selected or analog
output frequency. Graphs of the total power dissipation are
shown along with the power dissipation of the DVDD18 and
CVDD18 supplies.
Figure 84. Total Power Dissipation vs. f
AD9148
2.75
2.50
2.25
2.00
1.75
1.50
1.25
1.00
0.75
0.50
0.25
0
has four supply rails: AVDD33, IOVDD, DVDD18,
1×
2×
4×
8×
Inverse Sinc Filter Disabled
f
DATA
DATA
(MSPS)
with Coarse Modulation, PLL, and
AD9148
Rev. B | Page 63 of 72
Figure 86. DVDD18 Power Dissipation vs. f
Figure 85. Total Power Dissipation vs. f
Figure 87. DVDD18 Power Dissipation vs. f
3.25
3.00
2.75
2.50
2.25
2.00
1.75
1.50
1.25
1.00
0.75
0.50
0.25
2.00
1.75
1.50
1.25
1.00
0.75
0.50
0.25
2.50
2.25
2.00
1.75
1.50
1.25
1.00
0.75
0.50
0.25
0
0
0
and Inverse Sinc Filter Disabled
and Inverse Sinc Filter Disabled
1×
2×
4×
8×
1×
2×
4×
8×
1×
2×
4×
8×
Inverse Sinc Filter Disabled
f
f
f
DATA
DATA
DATA
DATA
(MSPS)
(MSPS)
(MSPS)
DATA
with Fine Modulation, PLL, and
DATA
with Coarse Modulation, PLL,
with Fine Modulation, PLL,
AD9148