T15C1 ACER, T15C1 Datasheet - Page 19

• Manufacturer Part Number: T15C1
• Description: COLOR TFT LCD MODULE
• Manufacturer: ACER

8. PRECAUTIONS
8.1 HANDLING PRECAUTIONS
8.2 STORAGE PRECAUTIONS
8.3 OPERATION PRECAUTIONS
(1) The module should be assembled into the system firmly by using every mounting hole. Be careful not
(2) While assembling or installing modules, it can only be in the clean area. The dust and oil may cause
(3) Use fingerstalls or soft gloves in order to keep display clean during the incoming inspection and
(4) Do not press or scratch the surface harder than a HB pencil lead on the panel because the polarizer is
(5) If the surface of the polarizer is dirty, please clean it by some absorbent cotton or soft cloth. Do not use
(6) Wipe off water droplets or oil immediately. Staining and discoloration may occur if they left on panel for
(7) If the liquid crystal material leaks from the panel, it should be kept away from the eyes or mouth. In
(8) Protect the module from static electricity, it may cause damage to the C-MOS Gate Array IC.
(9) Do not disassemble the module.
(10) Do not pull or fold the lamp wire.
(11) Pins of I/F connector should not be touched directly with bare hands.
(1) High temperature or humidity may reduce the performance of module. Please store LCD module within
(2) It is dangerous that moisture come into or contacted the LCD module, because the moisture may
(3) It may reduce the display quality if the ambient temperature is lower than 10 ºC. For example, the
(1) Do not pull the I/F connector in or out while the module is operating.
(2) Always follow the correct power on/off sequence when LCD module is connecting and operating. This
(3) The startup voltage of Backlight is approximately 1000 Volts. It may cause electrical shock while
to twist or bend the module.
electrical short or damage the polarizer.
assembly process.
very soft and easily scratched.
Ketone type materials (ex. Acetone), Ethyl alcohol, Toluene, Ethyl acid or Methyl chloride. It might
permanently damage the polarizer due to chemical reaction.
a long time.
case of contacting with hands, legs or clothes, it must be washed away thoroughly with soap.
the specified storage conditions.
damage LCD module when it is operating.
response time will become slowly, and the starting voltage of lamp will be higher than the room
temperature.
can prevent the CMOS LSI chips from damage during latch-up.
assembling with inverter. Do not disassemble the module or insert anything into the Backlight unit.
19 / 19
Issued Date:Dec.8’2000
Model No.: M150X1
Approval
Version 2.0