T15C1 ACER, T15C1 Datasheet - Page 9

• Manufacturer Part Number: T15C1
• Description: COLOR TFT LCD MODULE
• Manufacturer: ACER

Note (2) The voltage shown above should be applied to the lamp for more than 1 second after startup.
Note (3) The lamp frequency may generate interference with horizontal synchronous frequency from the
Note (4) P
Note (5) The lifetime of lamp is defined as the time when it continues to operate under the conditions at Ta
Note (6) The waveform of the voltage output of inverter must be area-symmetric and the design of the
Otherwise the lamp may not be turned on.
display, and this may cause line flow on the display. In order to avoid interference, the lamp
frequency should be detached from the horizontal synchronous frequency and its harmonics as far
as possible.
= 25 ±2
(a) When the brightness becomes ≦ 50% of its original value.
(b) When the effective ignition length becomes ≦ 80% of its original value. (Effective ignition
inverter must have specifications for the modularized lamp. The performance of the Backlight,
such as lifetime or brightness, is greatly influenced by the characteristics of the DC-AC inverter for
the lamp. All the parameters of an inverter should be carefully designed to avoid generating too
much current leakage from high voltage output of the inverter. When designing or ordering the
inverter please make sure that a poor lighting caused by the mismatch of the Backlight and the
inverter (miss-lighting, flicker, etc.) never occurs. If the above situation is confirmed, the module
should be operated in the same manners when it is installed in your instrument.
L
= I
length is defined as an area that the brightness is less than 70% compared to the center point.)
L
×V
o
C and I
L
L
=7.0mA
RMS
until one of the following events occurs:
9 / 9
Issued Date:Dec.8’2000
Model No.: M150X1
Approval
Version 2.0