dsPIC33F Microchip Technology, dsPIC33F Datasheet - Page 51

• Manufacturer Part Number: dsPIC33F
• Description: (dsPIC24H / dsPIC33F) Flash Programming Specification
• Manufacturer: Microchip Technology

4.2.8
The PROGC command instructs the programming exec-
utive to program a single Configuration register, located
at the specified memory address.
After the specified data word has been programmed to
code memory, the programming executive verifies the
programmed data against the data in the command.
Expected Response (2 words):
0x1400
0x0002
© 2007 Microchip Technology Inc.
15
Opcode
Length
Reserved
Addr_MSB
Addr_LS
Data
Opcode
Field
dsPIC33F/PIC24H PROGRAMMING SPECIFICATION
Reserved
12 11
PROGC COMMAND
0x4
0x4
0x0
MSB of 24-bit destination address
Least Significant 16 bits of 24-bit
destination address
8-bit data word
Addr_LS
Data
8 7
Description
Length
Addr_MSB
Preliminary
0
4.2.9
The PROGP command instructs the programming exec-
utive
(64 instruction words) to the specified memory
address. Programming begins with the row address
specified in the command. The destination address
should be a multiple of 0x80.
The data to program to memory, located in command
words D_1 through D_96, must be arranged using the
packed instruction word format shown in Figure 4-4.
After all data has been programmed to code memory,
the programming executive verifies the programmed
data against the data in the command.
Expected Response (2 words):
0x1500
0x0002
15
Opcode
Length
Reserved
Addr_MSB
Addr_LS
D_1
D_2
...
D_96
Note:
Opcode
Field
to
Reserved
12 11
program
PROGP COMMAND
Refer to Table 2-2 for code memory size
information.
0x5
0x63
0x0
MSB of 24-bit destination address
Least Significant 16 bits of 24-bit
destination address
16-bit data word 1
16-bit data word 2
16-bit data word 3 through 95
16-bit data word 96
one
Addr_LS
D_N
D_1
D_2
...
8 7
Description
row
Length
of
Addr_MSB
DS70152D-page 51
code
memory
0