dsPIC33F Microchip Technology, dsPIC33F Datasheet - Page 52

• Manufacturer Part Number: dsPIC33F
• Description: (dsPIC24H / dsPIC33F) Flash Programming Specification
• Manufacturer: Microchip Technology

dsPIC33F/PIC24H PROGRAMMING SPECIFICATION
4.2.10
The PROGW command instructs the programming exec-
utive to program one word of code memory (3 bytes) to
the specified memory address.
After the word has been programmed to code memory,
the programming executive verifies the programmed
data against the data in the command.
Expected Response (2 words):
0x1600
0x0002
DS70152D-page 52
15
Opcode
Length
Reserved
Addr_MSB
Addr_LS
Data_MSB
Data_LS
Opcode
Field
Reserved
Reserved
12 11
PROGW COMMAND
0x6
0x5
0x0
MSB of 24-bit destination address
Least Significant 16 bits of 24-bit
destination address
MSB of 24-bit data
Least Significant 16 bits of 24-bit
data
Addr_LS
Data_LS
8 7
Description
Length
Addr_MSB
Data_MSB
Preliminary
0
4.2.11
The QBLANK command queries the programming exec-
utive to determine if the contents of code memory are
blank (contains all ‘1’s). The size of code memory to
check must be specified in the command.
The Blank Check for code memory begins at 0x0 and
advances toward larger addresses for the specified
number of instruction words.
QBLANK returns a QE_Code of 0xF0 if the specified
code memory and code-protect bits are blank;
otherwise, QBLANK returns a QE_Code of 0x0F.
Expected Response (2 words for blank device):
0x1AF0
0x0002
Expected Response (2 words for non-blank device):
0x1A0F
0x0002
15
Opcode
Length
PSize
Note:
Opcode
Field
12 11
QBLANK COMMAND
The QBLANK command does not check
the system operation Configuration bits
since these bits are not set to ‘1’ when a
Chip Erase is performed.
0xA
0x2
Length of program memory to check
(in 24-bit words) +1, up to a max of
49152
© 2007 Microchip Technology Inc.
PSize
Description
Length
0