MT18VDDT6472PHG-265 Micron, MT18VDDT6472PHG-265 Datasheet

no-image

MT18VDDT6472PHG-265

Manufacturer Part Number
MT18VDDT6472PHG-265
Description
512MB DDR SDRAM SODIMM
Manufacturer
Micron
Datasheet
DDR SDRAM
SMALL-OUTLINE DIMM
Features
• 200-pin, small-outline, dual in-line memory
• Supports ECC error detection and correction
• Fast data transfer rates: PC2100 and PC2700
• Utilizes 266 MT/s and 333 MT/s DDR SDRAM
• 128MB (16 Meg x 72); 256MB (32 Meg x 72); 512MB
• V
• V
• 2.5V I/O (SSTL_2 compatible)
• Commands entered on each positive CK edge
• DQS edge-aligned with data for READs; center-
• Internal, pipelined double data rate (DDR)
• Four internal device banks for concurrent operation
• Programmable burst lengths: 2, 4, or 8
• Auto precharge option
• Auto Refresh and Self Refresh Modes
• 15.625µs (128MB), 7.8125µs (256MB, 512MB, 1GB)
• Serial Presence Detect (SPD) with EEPROM
• Programmable READ CAS latency
• Bidirectional data strobe (DQS) transmitted/re-
• Differential clock inputs CK and CK#
• Gold edge contacts
Table 1:
pdf: 09005aef808ffe58, source: 09005aef808ffdc7
DD9C16_32_64_128x72PHG.fm - Rev. B 9/04 EN
Refresh Count
Row Addressing
DeviceBankAddressing
Base Device Configuration
Column Addressing
Module Rank Addressing
PRODUCTS AND SPECIFICATIONS DISCUSSED HEREIN ARE FOR EVALUATION AND REFERENCE PURPOSES ONLY AND ARE SUBJECT TO CHANGE BY
module (SODIMM)
components
(64 Meg x 72); 1GB (128 Meg x 72)
aligned with data for WRITEs
architecture; two data accesses per clock cycle
maximum average periodic refresh interval
ceived with data—i.e., source-synchronous data
capture
MICRON WITHOUT NOTICE. PRODUCTS ARE ONLY WARRANTED BY MICRON TO MEET MICRON’S PRODUCTION DATA SHEET SPECIFICATIONS.
DD
DDSPD
= V
DD
= +2.3V to +3.6V
Q = +2.5V
Address Table
128Mb (16 Meg x 8)
4K (A0–A11)
4 (BA0, BA1)
1K (A0–A9)
128MB
1 (S0#)
128MB, 256MB, 512MB, 1GB (x72, ECC, PLL, SR)
4K
256Mb (32 Meg x 8)
4 (BA0, BA1)
8K (A0–A12)
1K (A0–A9)
1
256MB
1 (S0#)
8K
NOTE:
OPTIONS
• Operating Temperature Range
• Package
• Memory Clock, Speed, CAS Latency
• PCB
MT9VDDT1672PH(I) – 128MB,
MT9VDDT3272PH(I) – 256MB,
MT9VDDT6472PH(I) – 512MB,
MT9VDDT12872PH(I) – 1GB (ADVANCE
For the lastest data sheet, please refer to the Micron
Web site:
Low Profile: 1.25in. (31.75mm)
Figure 1: 200-Pin SODIMM (MO-224)
Commercial (0°C T
Industrial (-40°C T
200-pin SODIMM (standard)
200-pin SODIMM (lead-free)
6ns (267 MHz), 333 MT/s, CL = 2.5
7.5ns (133 MHz), 266 MT/s, CL = 2
7.5ns (133 MHz), 266 MT/s, CL = 2
7.5ns (133 MHz), 266 MT/s, CL = 2.5
1.25in. (31.75mm)
200-PIN DDR SDRAM SODIMM
1. Consult Micron for product availability; indus-
2. CL = Device CAS (READ) Latency.
www.micron.com/products/modules
trial temperature option available in -265 speed
only.
512Mb (64 Meg x 8)
1K (A0–A9, A11)
4 (BA0, BA1)
8K (A0–A12)
512MB
1 (S0#
8K
A
A
+85°C)
+70°C)
©2004 Micron Technology, Inc. All rights reserved.
1Gb (128 Meg x 8)
2K (A0–A9, A11)
16K (A0–A13)
2
4 (BA0, BA1)
ADVANCE
1 (S0#)
)
1GB
8K
MARKING
-26A
None
-262
-335
-265
Y
I
G
1
1
1
1

Related parts for MT18VDDT6472PHG-265

MT18VDDT6472PHG-265 Summary of contents

Page 1

... PRODUCTS AND SPECIFICATIONS DISCUSSED HEREIN ARE FOR EVALUATION AND REFERENCE PURPOSES ONLY AND ARE SUBJECT TO CHANGE BY MICRON WITHOUT NOTICE. PRODUCTS ARE ONLY WARRANTED BY MICRON TO MEET MICRON’S PRODUCTION DATA SHEET SPECIFICATIONS. 128MB, 256MB, 512MB, 1GB (x72, ECC, PLL, SR) 200-PIN DDR SDRAM SODIMM MT9VDDT1672PH(I) – ...

Page 2

... GB/s 1GB 128 Meg x 72 2.1 GB/s 1GB 128 Meg x 72 2.1 GB/s 1GB 128 Meg x 72 2.1 GB/s 1GB 128 Meg x 72 2.1 GB/s Micron Technology, Inc., reserves the right to change products or specifications without notice. 2 ADVANCE CLOCK LATENCY MEMORY CLOCK/ t DATA RATE (CL - RCD - 6ns, 333 MT/s 2.5-3-3 6ns, 333 MT/s 2.5-3-3 7.5ns, 266 MT/s 2-2-2 7 ...

Page 3

... DM5 DQ22 100 A11 150 U10 U9 (all even pins) pin SS Micron Technology, Inc., reserves the right to change products or specifications without notice. ©2004 Micron Technology, Inc. All rights reserved. ADVANCE 152 DQ46 154 DQ47 156 V DD 158 NC 160 NC 162 V ...

Page 4

... WRITE access sampled on both edges of DQS. Although DM pins are input-only, the DM loading is designed to match that of DQ and DQS pins. Input/ Check Bits. Output 4 DESCRIPTION is applied. DD Micron Technology, Inc., reserves the right to change products or specifications without notice. ©2004 Micron Technology, Inc. All rights reserved. ADVANCE ...

Page 5

... Supply DQ Power Supply: +2.5V ±0.2V Supply Ground. SS Supply Serial EEPROM positive power supply: +2.3V to +3.6V. DDSPD NC – No Connect: These pins should be left unconnected. 5 DESCRIPTION Micron Technology, Inc., reserves the right to change products or specifications without notice. ©2004 Micron Technology, Inc. All rights reserved. ADVANCE ...

Page 6

... DDR SDRAM X 2 DDR SDRAM X 1 4.7pF SERIAL PD SCL U8 SDA SA0 SA1 SA2 SPD/EEPROM DDR SDRAMS REF DDR SDRAMS SS DDR SDRAMS Micron Technology, Inc., reserves the right to change products or specifications without notice. ©2004 Micron Technology, Inc. All rights reserved. ADVANCE ...

Page 7

... Reprogramming the mode register will not alter the contents of the memory, provided it is performed cor- rectly. The mode register must be loaded (reloaded) when all device banks are idle and no bursts are in Micron Technology, Inc., reserves the right to change products or specifications without notice. 7 ADVANCE For more ...

Page 8

... A13 M15 and M14 (BA1 and BA0) must be “0, 0” to select the base mode register (vs. the extended mode register). Micron Technology, Inc., reserves the right to change products or specifications without notice. 8 Diagram BA0 A11 A10 A9 11 ...

Page 9

... Micron device, JEDEC specifications recommend when a LOAD MODE REGISTER command is issued 133 reset the DLL, it should always be followed by a LOAD MODE REGISTER command to select normal operat- ing mode. Micron Technology, Inc., reserves the right to change products or specifications without notice. 9 ADVANCE T2n READ ...

Page 10

... BA1 and BA0 (E13 and E12 for 128MB; E14 and E13 for 256MB, 512MB; or E15 and E14 for 1GB) must be “0, 1” to select the Extended Mode Register (vs. the base Mode Register). 2. QFC# is not supported. Micron Technology, Inc., reserves the right to change products or specifications without notice. 10 Definition Diagram A10 A8 ...

Page 11

... DDR SDRAM SODIMM of commands and operations, refer to the Micron 128Mb, 256Mb, 512Mb, or 1Gb DDR SDRAM compo- nent data sheets. CS Micron Technology, Inc., reserves the right to change products or specifications without notice. 11 ADVANCE RAS# CAS# WE# ADDR ...

Page 12

... SYMBOL REF 0. REF AC Micron Technology, Inc., reserves the right to change products or specifications without notice. 12 (ambient - commercial 0°C to +70°C A (ambient - industrial -40°C to +85°C A MIN MAX UNITS 2.3 2.7 2.3 2 DDQ DDQ 0.04 - 0.04 REF REF ...

Page 13

... REFC = RFC (MIN REFC = 15.625µ (MIN); Micron Technology, Inc., reserves the right to change products or specifications without notice +2.5V ±0. MAX -26A/ -335 -262 -265 UNITS NOTES 1,125 990 945 mA 1,215 ...

Page 14

... Micron Technology, Inc., reserves the right to change products or specifications without notice. ©2004 Micron Technology, Inc. All rights reserved. ADVANCE UNITS NOTES 21, 28 21, 28, ...

Page 15

... Micron Technology, Inc., reserves the right to change products or specifications without notice. ©2004 Micron Technology, Inc. All rights reserved. ADVANCE UNITS NOTES 21, 28 21, 28, ...

Page 16

... Micron Technology, Inc., reserves the right to change products or specifications without notice. ©2004 Micron Technology, Inc. All rights reserved. ADVANCE UNITS NOTES 21, 28 21, 28, ...

Page 17

... DQSL 0.45 t DQSQ 0.75 1.25 t DQSS 0.2 t DSS 0.2 t DSH CH +0. - 2.2 IPW t 0.80 MRD Micron Technology, Inc., reserves the right to change products or specifications without notice. 17 MIN TYP MAX C 4 18 -262 -26A/-265 MIN MAX MIN MAX -0.75 +0.75 -0.75 +0.75 0.45 0.55 0.45 0.55 0.45 0.55 0.45 0.55 7 ...

Page 18

... WTR DQSQ 140.6 t 70.3 REFC 15.6 t 7.8 REFI t 0 VTD 75 t XSNR 200 200 t XSRD Micron Technology, Inc., reserves the right to change products or specifications without notice. 18 -262 -26A/-265 MAX MIN MAX UNITS NOTES t HP- t QHS 0.75 0.75 40 120,000 40 120,000 120 ...

Page 19

... CK that meets the minimum measurements is the largest multi that meets the maximum absolute t RAS. Micron Technology, Inc., reserves the right to change products or specifications without notice. ©2004 Micron Technology, Inc. All rights reserved. ADVANCE t IS has unaf- stabi- REF ...

Page 20

... DH for each 100 mv/ns reduction in slew rate. If must not vary more than 4 percent if CKE is DD 3.450 3.400 3.350 3.300 2.275 2.238 2.200 47/53 46.5/54.5 46/54 45.5/55.5 Micron Technology, Inc., reserves the right to change products or specifications without notice. ©2004 Micron Technology, Inc. All rights reserved. ADVANCE ( ) and 3.250 2 ...

Page 21

... are 0Vs, provided a minimum DD DD 0.5 1.0 1 (V) DD OUT Micron Technology, Inc., reserves the right to change products or specifications without notice. ©2004 Micron Technology, Inc. All rights reserved. ADVANCE Q + 1.5V for a undershoot: IL 3ns and the , and V must REF TT 2.0 2.5 ...

Page 22

... HIGH or LOW. 48. The -335 speed grade will operate with 40ns and 2Q specifies the DD frequency. Micron Technology, Inc., reserves the right to change products or specifications without notice. 22 2F, I 2N, and I 2Q are similar “worst case.” ...

Page 23

... Micron Technology, Inc., reserves the right to change products or specifications without notice. 23 ADVANCE V and V Q Ramp DD DD Apply V and V REF TT CKE must be LVCMOS Low Apply stable CLOCKs Wait at least 200us Bring CKE High with a NOP command ...

Page 24

... GND 24 +70°C MAX UNITS 170 MHz 60 % 100 100 100 ps 4 V/ R=60 R= Micron Technology, Inc., reserves the right to change products or specifications without notice. ©2004 Micron Technology, Inc. All rights reserved. ADVANCE NOTES ...

Page 25

... NOTE: 1. Micron Technology, Inc. recommends a minimum air flow of 1 meter/second (~197 LFM) across all modules. 2. The component case temperature measurements shown above were obtained experimentally. The typical system to be used for experimental purposes is a dual-processor 600 MHz work station, fully loaded, with four comparable registered memory modules ...

Page 26

... Figure 13: Definition of Start and Stop SCL SDA DATA STABLE 26 START BIT 8 Acknowledge Micron Technology, Inc., reserves the right to change products or specifications without notice. ©2004 Micron Technology, Inc. All rights reserved. ADVANCE STOP BIT 9 ...

Page 27

... HD:STA t HD:DAT CHIP ENABLE SA2 SA1 1 0 SA2 SA1 t SU:DAT t SU:STO Micron Technology, Inc., reserves the right to change products or specifications without notice. ©2004 Micron Technology, Inc. All rights reserved. ADVANCE SA0 RW SA0 RW t BUF UNDEFINED ...

Page 28

... LOW 1 0.3 f SCL 400 KHz t SU:DAT 100 t SU:STA 0.6 t SU:STO 0.6 t WRC 10 Micron Technology, Inc., reserves the right to change products or specifications without notice. ©2004 Micron Technology, Inc. All rights reserved. ADVANCE UNITS µA µA µA mA NOTES µs 1 µ µs µs µ ...

Page 29

... Micron Technology, Inc., reserves the right to change products or specifications without notice. ©2004 Micron Technology, Inc. All rights reserved. ADVANCE ...

Page 30

... Variable Data Variable Data Variable Data Variable Data Variable Data Variable Data – – Micron Technology, Inc., reserves the right to change products or specifications without notice. ©2004 Micron Technology, Inc. All rights reserved. ADVANCE ...

Page 31

... RP (see note 5) t RRD 15ns (-262/-26A/-265) t RCD (see note 5) t RAS (see note 3) 45ns (-262/-26A/-265) Micron Technology, Inc., reserves the right to change products or specifications without notice. 31 ENTRY(VERSION) MT9VDDT12872PH 128 256 SDRAM DDR SSTL 2 ...

Page 32

... DQSQ 0.5ns (-262/-26A/-265) 0.55ns (-335) 0.75ns (-262/-26A/-265) Revision 1 RP. Actual device spec value is 40ns. Micron Technology, Inc., reserves the right to change products or specifications without notice. 32 MT9VDDT12872PH ...

Page 33

... S. Federal Way, P.O. Box 6, Boise, ID 83707-0006, Tel: 208-368-3900 E-mail: prodmktg@micron.com, Internet: http://www.micron.com, Customer Comment Line: 800-932-4992 Micron, the M logo, and the Micron logo are trademarks and/or service marks of Micron Technology, Inc. All other trademarks are the property of their respective owners. ...

Related keywords