NL10276ac28_02L NEC, NL10276ac28_02L Datasheet - Page 27

• Manufacturer Part Number: NL10276ac28_02L
• Description: TFT COLOR LCD MODULE
• Manufacturer: NEC

INITIAL VALUE CHANGE FUNCTIONS
All Reset).
Continue to next page
No.
Initial value, OSD items, etc. can be changed.
The changed initial value becomes initial value in each preset timing, and is applicable when it is reset (including
• How to transpose to initial value change mode.
• Operation
• How to return to normal mode
1
2
3
4
5
Hierarchical type : Connect SET and UP to GND at the same time when OSD function is in “information”
Toggle type
SEL, UP, DOWN, and EXIT
Connect EXIT to GND or turn off Power supply when OSD is closed.
Both LEDON and LEDOFF become “H” when this mode is operating.
Compatible
Brightness
Color Level
Contrast
LCD Data
: Connect SEL to GND while SEL is connected to GND when OSD function is in “All Reset”
Form
mode.
mode.
Mode
HSE
Delay
VD
HD
Auto Adjust
Par. Delay
Par. HD
Data Sheet EN0456EJ1V0DS00
It becomes valid when Toggle menu type is selected only.
The initial value of contrast (RGB synchronous) becomes 100.
The NEC factory value: NO.
The maximum value of brightness of backlight can be changed.
Initial value: 100
The initial value of color level can be changed.
Initial value: 128
The initial value of contrast can be changed.
Initial value: 128
No. of PRESET TIMINGS is displayed.
The initial value of the double value can be changed.
The value of the CLK delay can be changed. (Initial value can not be
changed.)
The initial value of the up-down position of the display position can be
changed.
The initial value of the left-right position of the display position can be
changed.
Auto adjust
The compensation value of Delay of the auto adjust can be changed.
The compensation value of horizontal position of the auto adjust can be
changed.
YES : Sync on Green
The initial value of contrast (RGB synchronous) becomes 128.
NO : No Sync on Green
(When NO is selected by Compatible in Toggle menu type, the initial value
of RGB synchronous only is 100.
As for RGB synchronous, this clause setup value becomes valid as the
Initial value regardless of the selections state of Compatible.)
Initial value: 0
Valid range: 0 to 255
Valid range: 0 to 127
Function items
NL10276AC28-02L
27