NL10276ac28_02L NEC, NL10276ac28_02L Datasheet - Page 28

• Manufacturer Part Number: NL10276ac28_02L
• Description: TFT COLOR LCD MODULE
• Manufacturer: NEC

* The value of No.5 LCD Data are memorized in every Preset timing.
* Selected adjust item is displayed with OSD.
* Data except Auto Adjust of 5. LCD Data are saved at the moment when it was returned in the extreme upper
* All adjust value is returned to the NEC factory value when menu type is changed.
* Evaluate compensation value of Par. Delay and Par. HD of No.5 LCD Data, and be decided.
28
No.
10
menu. But it is not kept when the power supply is cut off halfway.
5
6
7
8
9
LCD Data
Sel Data
Information
OSD Position
Used Time
Full Reset
Form
LCD Reset
S – Lvl Sel
S – Cnt Sel
SOG Sel
MENU Sel
Button Sel
PSOSD Sel
Data Sheet EN0456EJ1V0DS00
The values in No. 5 LCD Data are returned to the NEC factory values.
The adjustment that RGB is independent can be made impossible by the
adjustment of the Color level. In this case, the adjustment item that RGB is
independent is not displayed on the menu screen.
The adjustment that RGB is independent can be made impossible by the
adjustment of the Color level. In this case, the adjustment item that RGB is
independent is not displayed on the menu screen.
Select or non-select of Sync on Green and display or non-display of select
menu are selected. When non-display selected, Config is not displayed.
* It becomes effective only when the Hierarchical menu type is selected.
But it becomes invalid when Toggle menu type is selected.
B (blue) or S (transparency) can be selected for the Background Color of the
OSD menu.
4 (SEL, UP, DOWN and EXIT) or 7 (SEL, UP, DPWN, RIGHT, LEFT, EXIT
Display or no display for Power Save OSD can be selected.
(For detail, see INFORMARION DISPLAY BY OSD)
Input signal information is displayed.
The initial value of OSD display position can be changed.
C: Center UL: Upper left UR: Upper right DL: Down left DR: Down right
Use time in normal and Power save state is displayed.
Use time is recorded in every five minutes. But it is not recorded when
Power supply is cut off within five minutes.
All value is returned to NEC factory value. It takes about seven seconds.
Initial value: ON.
Initial value: ON.
Initial value: Y/N
Initial value: OFF
Initial value: C
Initial value: B
and RESET) number of adjust switch are selected.
Initial value: 7
ON : Independent adjustment is available.
OFF : Independent adjustment is impossible
ON : Independent adjustment is available.
OFF : Independent adjustment is impossible
• FUNC (Y: For Sync on Green select)
• MENU (Y: Select menu display.)
(N: For Sync on Green non-select)
(N: Select menu non-display.)
ON: Display
Function items
OFF: No display
NL10276AC28-02L