BUS-12-087 FCI-CONNECTOR [FCI connector], BUS-12-087 Datasheet - Page 13

no-image

BUS-12-087

Manufacturer Part Number
BUS-12-087
Description
Manufacturer
FCI-CONNECTOR [FCI connector]
Datasheet
NUMBER
TITLE
Ribcage™ II Printed Wiring Board Connector System
Copyright FCI
Form E-3334
Rev F
BUS-12-087
3.7.7 Salt Spray - After exposure of the mated connector to a
3.7.8 Solderability - The minimum tail length solderable on both
3.7.9 Resistance to Soldering Heat
salt fog atmosphere, the low level circuit resistance shall not exceed the value
specified in Table 1 (see paragraph 3.5.2). The test shall be in accordance with MIL-
STD-202, Method 101; the following test details shall apply:
(a)
(b)
the receptacle assemblies and headers shall be up to the standoffs on the respective
housings. The test shall be similar to MIL-STD-202, Method 208; the following details
shall apply:
(a)
(b)
(c)
(d)
(e)
(f)
(g)
(h)
3.7.9.1
3.7.9.2
TYPE
Salt solution: 5 percent by weight
Test condition: B (48 hours)
Aging: suspended 2 inches above boiling distilled water for 60 minutes.
Acceptable Coverage: 95% minimum
Solder: 60/40 Tin-Lead in accordance with QQ-S-571, Type S
Flux: Type A, in accordance with MIL-F-14256
Flux immersion time: terminal dipped and allowed to sit 60 seconds
Solder dwell time: terminal held immediately above solder for 10 seconds then
immersed for 3 seconds
Solder temperature: 232 +_ 5 o C
Number of samples: 20
PRODUCT SPECIFICATION
physical damage to the insulator when the unterminated connector or
header is subjected to the high temperature extreme imposed during
wave soldering. The test shall be in accordance with MIL-STD-202,
Method 210; the following details shall apply:
(a)
(b)
IR Reflow - There shall be no evidence of
physical damage to the insulator when the unterminated header or
connector is subjected to a maximum of 445 o F (230 o C) during the
solder reflow process.
Wave Soldering - There shall be no evidence of
Test condition: B (10 seconds @ 260 +_ 5 o C)
Immersion depth: To within 0.040 +_ 0.015 of insulator
PDM: Rev:M
STATUS:
PAGE
AUTHORIZED BY
CLASSIFICATION
C. Martinez
Released
13 of 21
UNRESTRICTED
Printed: Nov 28, 2010
REVISION
DATE
27 Feb 07
M
GS-01-001
.

Related parts for BUS-12-087