BUS-12-087 FCI-CONNECTOR [FCI connector], BUS-12-087 Datasheet - Page 15

• Manufacturer Part Number: BUS-12-087
• Manufacturer: FCI-CONNECTOR [FCI connector]

NUMBER
TITLE
Ribcage™ II Printed Wiring Board Connector System
Copyright FCI
Form E-3334
Rev F
4.4
BUS-12-087
4.3.3 Test Sequence - The sample connectors shall be subjected to
Requalification Testing
If either of the following conditions occur, the product responsible engineer shall initiate
requalification testing:
4.4.1 A significant design change is made to an existing product
Requalification testing shall consist of all or applicable parts of the Qualification Test Matrix as
determined by development/product, quality, test, and reliability engineering.
Sample No.
the inspections specified in Table VI in the order shown.
previously qualified under this specification. A significant design change shall be
defined to include, but not be limited to, changes in contact material composition,
contact material thickness, contact force, contact surface geometry, underlying
material composition, underlying material thickness, insulation design, contact base
material, or contact lubrication requirements.
1-2
3-6
7-8
TYPE
TABLE V - SAMPLE CONFIGURATION
PRODUCT SPECIFICATION
Terminated
Yes
No
No
PDM: Rev:M
Mating Header Required
Yes
No
No
STATUS:
PAGE
AUTHORIZED BY
CLASSIFICATION
C. Martinez
Released
15 of 21
UNRESTRICTED
Printed: Nov 28, 2010
REVISION
DATE
27 Feb 07
M
GS-01-001
.