EPM2210 Altera Corporation, EPM2210 Datasheet - Page 34

• Manufacturer Part Number: EPM2210
• Description: (EPMxxxx) JTAG & In-System Programmability
• Manufacturer: Altera Corporation

I/O Structure
Figure 2–18. MultiVolt Core Feature in MAX II Devices
I/O Structure
2–28
MAX II Device Handbook, Volume 1
3.3-V or 2.5-V on
VCCINT Pins
IOEs support many features, including:
■
■
■
■
■
■
■
■
■
■
■
■
■
■
MAX II device IOEs contain a bidirectional I/O buffer.
the MAX II IOE structure. Registers from adjacent LABs can drive to or be
driven from the IOE’s bidirectional I/O buffers. The Quartus II software
automatically attempts to place registers in the adjacent LAB with fast
I/O connection to achieve the fastest possible clock-to-output and
registered output enable timing. For input registers, the Quartus II
software automatically routes the register to guarantee zero hold time.
You can set timing assignments in the Quartus II software to achieve
desired I/O timing.
1.8-V Core
Regulator
Voltage
Voltage
LVTTL and LVCMOS I/O standards
3.3-V, 32-bit, 33-MHz PCI compliance
Joint Test Action Group (JTAG) boundary-scan test (BST) support
Programmable drive strength control
Weak pull-up resistors during power-up and in system
programming
Slew-rate control
Tri-state buffers with individual output enable control
Bus-hold circuitry
Programmable pull-up resistors in user mode
Unique output enable per pin
Open-drain outputs
Schmitt trigger inputs
Fast I/O connection
Programmable input delay
MAX II Device
Core Version a.b.c variable
VCCINT Pins
1.8-V on
1.8-V Core
Voltage
MAX II Device With "G"
Ordering Code
Figure 2–19
Altera Corporation
December 2004
shows