MAX5893EGK MAXIM [Maxim Integrated Products], MAX5893EGK Datasheet

no-image

MAX5893EGK

Manufacturer Part Number
MAX5893EGK
Description
12-Bit, 500Msps Interpolating and Modulating Dual DAC with CMOS Inputs
Manufacturer
MAXIM [Maxim Integrated Products]
Datasheet
The MAX5893 programmable interpolating, modulating,
500Msps, dual digital-to-analog converter (DAC) offers
superior dynamic performance and is optimized for high-
performance wideband, single-carrier transmit applica-
tions. The device integrates a selectable 2x/4x/8x
interpolating filter, a digital quadrature modulator, and
dual 12-bit high-speed DACs on a single integrated cir-
cuit. At 30MHz output frequency and 500Msps update
rate, the in-band SFDR is 84dBc while consuming 1.1W.
The device also delivers 72dB ACLR for single-carrier
WCDMA at a 61.44MHz output frequency.
The selectable interpolating filters allow lower input data
rates while taking advantage of the high DAC update
rates. These linear-phase interpolation filters ease
reconstruction filter requirements and enhance the
passband dynamic performance. Individual offset and
gain programmability allow the user to calibrate out local
oscillator (LO) feedthrough and sideband suppression
errors generated by analog quadrature modulators.
The MAX5893 features a f
modulator. This modulator generates a quadrature-mod-
ulated IF signal that can be presented to an analog I/Q
modulator to complete the upconversion process. A
second digital modulation mode allows the signal to be
frequency-translated with image pairs at f
The MAX5893 features a standard 1.8V CMOS, 3.3V tol-
erant data input bus for easy interface. A 3.3V SPI™ port
is provided for mode configuration. The programmable
modes include the selection of 2x/4x/8x interpolating fil-
ters, f
with image rejection, channel gain and offset adjustment,
and offset binary or two’s complement data interface.
Pin-compatible 14- and 16-bit devices are also available.
Refer to the MAX5894** data sheet for the 14-bit version
and the MAX5895 data sheet for the 16-bit version.
Base Stations: 3G UMTS, CDMA, and GSM
Broadband Wireless Transmitters
Broadband Cable Infrastructure
Instrumentation and Automatic Test Equipment (ATE)
Analog Quadrature Modulation Architectures
19-3546; Rev 0; 2/05
Pin Configuration appears at end of data sheet.
SPI is a trademark of Motorola, Inc.
cdma2000 is a registered trademark of Telecommunications
Industry Association.
For pricing, delivery, and ordering information, please contact Maxim/Dallas Direct! at
1-888-629-4642, or visit Maxim’s website at www.maxim-ic.com.
12-Bit, 500Msps Interpolating and Modulating
IM
/ 2, f
IM
/ 4 or no digital quadrature modulation
________________________________________________________________ Maxim Integrated Products
General Description
IM
/ 4 digital image-reject
Applications
IM
/ 2 or f
Dual DAC with CMOS Inputs
IM
/ 4.
♦ 72dB ACLR at f
♦ Meets 3G UMTS, cdma2000
♦ Noise Spectral Density = -151dBFS/Hz at
♦ 90dBc SFDR at Low-IF Frequency (10MHz)
♦ 86dBc SFDR at High-IF Frequency (50MHz)
♦ Low Power: 511mW (f
♦ User Programmable
♦ EV Kit Available (Order the MAX5895EVKIT)
*EP = Exposed paddle.
**Future product—contact factory for availability.
MAX5893EGK -40°C to +85°C
MAX5893
MAX5894**
MAX5895
WCDMA)
(f
f
Selectable 2x, 4x, or 8x Interpolating Filters
Selectable Real or Complex Modulator Operation
Selectable Modulator LO Frequency: OFF, f
or f
Selectable Output Filter: Lowpass or Highpass
Channel Gain and Offset Adjustment
DATACLK
OUT
OUT
PART
PORT A
PORT B
PART
<0.01dB Passband Ripple
>99dB Stopband Rejection
DATA
DATA
IM
= 16MHz
= 122MHz)
/ 4
RESOLUTION
TEMP RANGE
(BITS)
OUT
12
14
16
Ordering Information
= 61.44MHz (Single-Carrier
CLK
Simplified Diagram
DAC UPDATE
RATE (Msps)
= 100MHz)
(10mm x 10mm)
PIN-PACKAGE
®
Selector Guide
, GSM Spectral Masks
68 QFN-EP*
500
500
500
Features
DAC
DAC
LOGIC
G6800-4
INPUT
CMOS
CMOS
CMOS
IM
CODE
PKG
OUTI
OUTQ
/ 2,
1

Related parts for MAX5893EGK

Related keywords