PIC12F1516 MICROCHIP [Microchip Technology], PIC12F1516 Datasheet - Page 135

• Manufacturer Part Number: PIC12F1516
• Description: 28/40/44-Pin Flash Microcontrollers with nanoWatt XLP Technology
• Manufacturer: MICROCHIP [Microchip Technology]

13.6
REGISTER 13-1:
REGISTER 13-2:
REGISTER 13-3:
 2011 Microchip Technology Inc.
bit 7
Legend:
R = Readable bit
u = Bit is unchanged
‘1’ = Bit is set
bit 7-0
bit 7
Legend:
R = Readable bit
u = Bit is unchanged
‘1’ = Bit is set
bit 7-0
bit 7
Legend:
R = Readable bit
u = Bit is unchanged
‘1’ = Bit is set
bit 7-0
R/W/HS-0/0
IOCBP7
IOCBN7
R/W-0/0
R/W-0/0
IOCBF7
Interrupt-On-Change Registers
IOCBP<7:0>: Interrupt-on-Change PORTB Positive Edge Enable bits
1 = Interrupt-on-Change enabled on the pin for a positive going edge. Associated Status bit and interrupt
0 = Interrupt-on-Change disabled for the associated pin.
IOCBN<7:0>: Interrupt-on-Change PORTB Negative Edge Enable bits
1 = Interrupt-on-Change enabled on the pin for a negative going edge. Associated Status bit and interrupt
0 = Interrupt-on-Change disabled for the associated pin.
IOCBF7:0>: Interrupt-on-Change PORTB Flag bits
1 = An enabled change was detected on the associated pin.
0 = No change was detected, or the user cleared the detected change.
R/W/HS-0/0
R/W-0/0
R/W-0/0
IOCBN6
IOCBP6
IOCBF6
Set when IOCBPx = 1 and a rising edge was detected on RBx, or when IOCBNx = 1 and a falling edge
was detected on RBx.
flag will be set upon detecting an edge.
flag will be set upon detecting an edge.
IOCBP: INTERRUPT-ON-CHANGE PORTB POSITIVE EDGE REGISTER
IOCBN: INTERRUPT-ON-CHANGE PORTB NEGATIVE EDGE REGISTER
IOCBF: INTERRUPT-ON-CHANGE PORTB FLAG REGISTER
W = Writable bit
x = Bit is unknown
‘0’ = Bit is cleared
W = Writable bit
x = Bit is unknown
‘0’ = Bit is cleared
W = Writable bit
x = Bit is unknown
‘0’ = Bit is cleared
R/W/HS-0/0
IOCBN5
R/W-0/0
IOCBP5
R/W-0/0
IOCBF5
R/W/HS-0/0
R/W-0/0
IOCBP4
R/W-0/0
IOCBN4
IOCBF4
Preliminary
U = Unimplemented bit, read as ‘0’
-n/n = Value at POR and BOR/Value at all other Resets
U = Unimplemented bit, read as ‘0’
-n/n = Value at POR and BOR/Value at all other Resets
U = Unimplemented bit, read as ‘0’
-n/n = Value at POR and BOR/Value at all other Resets
HS - Bit is set in hardware
R/W/HS-0/0
IOCBN3
R/W-0/0
IOCBP3
R/W-0/0
IOCBF3
PIC16(L)F1516/7/8/9
R/W/HS-0/0
R/W-0/0
IOCBP2
R/W-0/0
IOCBN2
IOCBF2
R/W/HS-0/0
IOCBN1
R/W-0/0
IOCBP1
R/W-0/0
IOCBF1
DS41452B-page 135
R/W/HS-0/0
R/W-0/0
IOCBP0
R/W-0/0
IOCBN0
IOCBF0
bit 0
bit 0
bit 0