CX28344 Conexant, CX28344 Datasheet - Page 93
![no-image](/images/no-image-200.jpg)
CX28344
Manufacturer Part Number
CX28344
Description
(CX2834x) Dual / Triple / Quad / Hex / Octal - Enhanced DS3 / E3 Framer
Manufacturer
Conexant
Datasheet
1.CX28344.pdf
(195 pages)
- Current page: 93 of 195
- Download datasheet (2Mb)
CX28342/3/4/6/8 Data Sheet
2.2.5.6
2.2.5.7
2.2.5.8
28348-DSH-001-B
Alarm Indication Signal (AIS)
In DS3, AIS event is declared when the receiver recognizes the AIS pattern (i.e.,
payload set to a 1010. . . sequence, with C-bits set to 0, X-bits set to 1, and F-, M-, and
P- bits all valid) for two consecutive frames with ten or less deviations per frame and
when OOF is off. The AIS event is terminated, if in the receive data stream, there are
eleven or more deviations per frame for two consecutive frames or OOF is on.
An E3-G.751 AIS event is declared when four or fewer 0s are received by the receiver
per frame period for two consecutive frame periods regardless of OOF. If OOF is off,
no more than two 0s can be present in the FAS bits in order to differentiate framed and
unframed all-1s. The AIS event is terminated if the receiver sees five or more 0s for
two consecutive frame periods.
In E3-G.832, AIS event is declared when nine or fewer 0s are received per frame
period, for two consecutive frame periods regardless of OOF. If OOF is off no more
than two 0s can be present in the FA bytes in order to differentiate framed and
unframed all-1s. The AIS event is terminated if the receiver sees ten or more 0s per
frame period for two consecutive frames periods.
The AIS event generates a AISStrt interrupt indication and sets the AIS status
indication bit (AISDet) in the Maintenance Status register. When the AIS event
terminates, AISEnd interrupt indication is generated, and the AIS status indication bit
is cleared.
In the presence of AIS event, (in both DS3 and E3) an all-1s sequence is transmitted
on the RXDAT pin if the RxAutoAll1 filed in the Feature5 Control register is set.
Idle Signal (IDLE)
In DS3, an IDLE event is declared when the receiver recognizes the IDLE pattern
(i.e., payload set to a 11001100 . . . sequence, with Cb3 bits set to 0, X-bits set to 1,
and F-, M- and P-bits all valid) for two consecutive frames with ten or fewer
deviations per frame when OOF is off. The IDLE event is terminated if the receiver
has eleven or more deviations from the expected IDLE patter per frame for two
consecutive frames or OOF is on.
The IDLE event generates a Idlestrt interrupt indication and sets the IDLE status
indication bit in the Maintenance Status register. When the IDLE event terminates,
IdleEnd interrupt indication is generated and the IDLE status indication bit is cleared.
In the presence of IDLE event (only in DS3), an all-1s sequence is transmitted on the
RXDAT pin if the RxAutoAll1 field in the Feature5 Control register is set.
Parity Error (PER) and P-Bit Disagreement (PBD)
In DS3, as per ANSI T1.231-1997, the PER event is declared when at least one of the
two P-bits differs in value from the expected value as calculated from the previous
frame. The PBD event is declared when the receive data has two p-bits which are not
equal.
Similarly in E3-G.832, PER event is declared if in the receive data, at least one of the
eight EM bits differs from the expected value calculated on the previous frame and
OOF is off. PBD is not defined in E3-G.832. Both PER and PBD are undefined in E3-
G.751. The PER event increments the PER counter and PBD event increments the
PBD counter.
If the ExtFEBE/Cj field in the TransmitOverheadInsertion1 Control register is enabled,
REI gets transmitted on the transmit stream upon a PER event in E3-G.832 mode.
Mindspeed Technologies™
Functional Description
2
-
47
Related parts for CX28344
Image
Part Number
Description
Manufacturer
Datasheet
Request
R
![PH2402](/images/manufacturer_photos/0/1/156/conexant_systems__inc__tmb.jpg)
Part Number:
Description:
Bluetooth RF Transceiver
Manufacturer:
Conexant Systems, Inc.
Datasheet:
![PH2401](/images/manufacturer_photos/0/1/156/conexant_systems__inc__tmb.jpg)
Part Number:
Description:
Bluetooth RF Transceiver
Manufacturer:
Conexant Systems, Inc.
Datasheet:
![BT8222EPFE](/images/manufacturer_photos/0/1/156/conexant_systems__inc__tmb.jpg)
Part Number:
Description:
ATM transmitter/receiver with UTOPIA interface
Manufacturer:
Conexant Systems, Inc.
Datasheet:
![CN8330EPJD](/images/manufacturer_photos/0/1/156/conexant_systems__inc__tmb.jpg)
Part Number:
Description:
Service SAR controller
Manufacturer:
Conexant Systems, Inc.
Datasheet:
![CN8223EPF](/images/manufacturer_photos/0/1/156/conexant_systems__inc__tmb.jpg)
Part Number:
Description:
CN8223EPFATM Transmitter/Receiver with UTOPIA Interface
Manufacturer:
Conexant Systems, Inc.
Datasheet:
![RC224ATL](/images/manufacturer_photos/0/1/156/conexant_systems__inc__tmb.jpg)
Part Number:
Description:
Embedded modem family
Manufacturer:
Conexant Systems, Inc.
Datasheet:
![BT8370KPF](/images/manufacturer_photos/0/1/156/conexant_systems__inc__tmb.jpg)
Part Number:
Description:
Fully integrated T1/E1 framer and line interface
Manufacturer:
Conexant Systems, Inc.
Datasheet:
![BT869KRF](/images/manufacturer_photos/0/1/156/conexant_systems__inc__tmb.jpg)
Part Number:
Description:
Flicker-free video encoder
Manufacturer:
Conexant Systems, Inc.
Datasheet:
![CX82100-41](/images/manufacturer_photos/0/1/156/conexant_systems__inc__tmb.jpg)
Part Number:
Description:
Home Networking Physical Layer Device with Integrated Analog Front End Circuitry Data Sheet (Preliminary) CX82100-41Home Network Processor (HNP)
Manufacturer:
Conexant Systems, Inc.
Datasheet:
![R6781-13](/images/manufacturer_photos/0/1/156/conexant_systems__inc__tmb.jpg)
Part Number:
Description:
Manufacturer:
Conexant Systems, Inc.
Datasheet:
![BT864AKRF](/images/manufacturer_photos/0/1/156/conexant_systems__inc__tmb.jpg)
Part Number:
Description:
Manufacturer:
Conexant Systems, Inc.
Datasheet:
![CX20493-31](/images/manufacturer_photos/0/1/156/conexant_systems__inc__tmb.jpg)
Part Number:
Description:
Manufacturer:
Conexant Systems, Inc.
Datasheet:
![BT868KRF](/images/manufacturer_photos/0/1/156/conexant_systems__inc__tmb.jpg)
Part Number:
Description:
Flicker-free video encoder
Manufacturer:
Conexant Systems, Inc.
Datasheet:
![CX81801-84](/images/manufacturer_photos/0/1/156/conexant_systems__inc__tmb.jpg)
Part Number:
Description:
SmartV.XX Modem
Manufacturer:
Conexant Systems, Inc.
Datasheet:
![CN8478EPF](/images/manufacturer_photos/0/1/156/conexant_systems__inc__tmb.jpg)
Part Number:
Description:
Multichannel synchronous communications controller
Manufacturer:
Conexant Systems, Inc.
Datasheet: