ATMEGA16U2-16AU Atmel, ATMEGA16U2-16AU Datasheet - Page 194

• Manufacturer Part Number: ATMEGA16U2-16AU
• Description: 8-bit Microcontrollers - MCU 16K Flash
• Manufacturer: Atmel

Specifications of ATMEGA16U2-16AU

• Product Category: 8-bit Microcontrollers - MCU
• Rohs: yes
• Core: AVR
• Data Bus Width: 8 bit
• Program Memory Size: 16 KB
• Data Ram Size: 1.25 KB
• Data Rom Size: 512 B
• Program Memory Type: Flash
• Factory Pack Quantity: 1250

20.8
20.9
7799D–AVR–11/10
D+/D- Read/write
USB Software Operating modes
Moreover, the pad can also be put in the Idle mode if the DETACH bit is set. It come back in the
Active mode when the DETACH bit is cleared.
The level of D+ and D- can be read and written using the UPOE register. The USB controller has
to be enabled to write a value. For read operation, the USB controller can be enabled or
disabled.
Depending on the USB operating mode, the software should perform some of the following
operations:
Power On the USB interface
Power Off the USB interface
Suspending the USB interface
• Configure PLL interface
• Enable PLL
• Check PLL lock
• Enable USB interface
• Configure USB interface (USB Endpoint 0 configuration)
• Attach USB device
• Detach USB device
• Disable USB interface
• Disable PLL
• Clear Suspend Bit
• Set USB suspend clock
• Disable PLL
SUSPI
WAKEUPI
PAD status
Active
Suspend detected = USB pad power down
Resume = USB pad wake-up
Power Down
ATmega8U2/16U2/32U2
Clear Suspend by software
Clear Resume by software
Active
194