CAT28F010G12 ON Semiconductor, CAT28F010G12 Datasheet - Page 12

• Manufacturer Part Number: CAT28F010G12
• Description: IC FLASH 1MBIT 120NS 32PLCC
• Manufacturer: ON Semiconductor

Specifications of CAT28F010G12

• Format - Memory: FLASH
• Memory Type: FLASH
• Memory Size: 1M (128K x 8)
• Speed: 120ns
• Interface: Parallel
• Voltage - Supply: 4.5 V ~ 5.5 V
• Operating Temperature: 0°C ~ 70°C
• Package / Case: 32-PLCC
• Density: 1Mb
• Access Time (max): 120ns
• Interface Type: Parallel
• Boot Type: Not Required
• Address Bus: 17b
• Operating Supply Voltage (typ): 5V
• Operating Temp Range: 0C to 70C
• Package Type: PLCC
• Program/erase Volt (typ): 11.4 to 12.6V
• Sync/async: Asynchronous
• Operating Temperature Classification: Commercial
• Operating Supply Voltage (min): 4.5V
• Operating Supply Voltage (max): 5.5V
• Word Size: 8b
• Number Of Words: 128K
• Supply Current: 30mA
• Mounting: Surface Mount
• Pin Count: 32
• Data Bus Width: 8 bit
• Architecture: Non Sectored
• Supply Voltage (max): 5.5 V
• Supply Voltage (min): 4.5 V
• Maximum Operating Current: 30 mA
• Mounting Style: SMD/SMT
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Other names: CAT28F010G-12; CAT28F010G-12

CAT28F010
Doc. No. MD-1019, Rev. G
Figure 7. Programming Algorithm
Note:
(1) The algorithm MUST BE FOLLOWED to ensure proper and reliable operation of the device.
INCREMENT
ADDRESS
NO
WRITE PROG. CMD
VERIFY COMMAND
PROG. COMMAND
WRITE PROGRAM
ADDR AND DATA
PROGRAMMING
PROGRAMMING
TIME OUT 10 s
WRITE SETUP
FROM DEVICE
TIME OUT 6 s
WRITE READ
APPLY V PPH
COMPLETED
APPLY V PPL
PLSCNT = 0
READ DATA
ADDRESS?
COMMAND
INITIALIZE
ADDRESS
VERIFY
DATA ?
START
LAST
YES
YES
(1)
NO
APPLY V PPL
PROGRAM
PLSCNT
ERROR
= 25 ?
INC
YES
NO
12
OPERATION
2ND WRITE
1ST WRITE
1ST WRITE
1ST WRITE
STANDBY
STANDBY
STANDBY
CYCLE
CYCLE
CYCLE
CYCLE
READ
BUS
COMMAND
PROGRAM
PROGRAM
VERIFY
SETUP
WRITE
READ
Characteristics subject to change without notice
VALID ADDRESS AND DATA
COMPARE DATA OUTPUT
SETS THE REGISTER FOR
INITIALIZE PULSE COUNT
PLSCNT = PULSE COUNT
READ BYTE TO VERIFY
(OR V PP HARDWIRED)
(OR V PP HARDWIRED)
V PP RAMPS TO V PPH
V PP RAMPS TO V PPL
© 2009 SCILLC. All rights reserved.
INITIALIZE ADDRESS
TO DATA EXPECTED
READ OPERATION
PROGRAMMING
COMMENTS
DATA = C0H
DATA = 40H
DATA = 00H
WAIT
WAIT
5108 FHD F06