MCP402XEV Microchip Technology, MCP402XEV Datasheet - Page 30

• Manufacturer Part Number: MCP402XEV
• Description: BOARD EVAL FOR MCP402X
• Manufacturer: Microchip Technology

Specifications of MCP402XEV

• Main Purpose: Digital Potentiometer
• Embedded: Yes, MCU, 8-Bit
• Utilized Ic / Part: MCP4021
• Primary Attributes: 1 Single Pot, 10 kOhm, 64 Tap, Non Volatile
• Secondary Attributes: 2.7 ~ 5.5 V, 150 ppm/°C
• Processor To Be Evaluated: MCP402X
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant, Lead free / RoHS Compliant

MCP401X/2X Evaluation Board User’s Guide
FIGURE C-2:
DS51546B-page 26
Select PIC10F206
These programmers use the PICkit™ 1 Baseline Flash Programmer software. This GUI
should be configured as shown in Figure C-2. Selecting Device Power causes the
BFMP to power the attached board all the time (not just during programming). This
allows the MCP402X Digital Potentiometer Evaluation Board to be easily demonstrated
without needing to carry a power supply (although a DMM is still required).
PICkit™ 1 Baseline Flash Programmer - Configuration #2.
Note:
When programming the MCP402X Digital Potentiometer Evaluation Board,
under “Board Controls” , DO NOT check Device Power. This ensures that
the PIC10F206 is only powered during the programming cycle.
Ensure Device Power IS checked and
2.5 kHz Osc is NOT checked.
© 2005 Microchip Technology Inc.