DEMO9S08MP16 Freescale Semiconductor, DEMO9S08MP16 Datasheet - Page 21

• Manufacturer Part Number: DEMO9S08MP16
• Description: BOARD DEMO FOR MC9S08MP16
• Manufacturer: Freescale Semiconductor

Specifications of DEMO9S08MP16

• Main Purpose: Power Management, Motor Control
• Embedded: *
• Utilized Ic / Part: MC9S08MP16
• Primary Attributes: *
• Secondary Attributes: *
• Processor To Be Evaluated: MC9S08MP16
• Interface Type: RS232, USB
• Operating Supply Voltage: 6 V
• Silicon Manufacturer: Freescale
• Core Architecture: HCS08
• Core Sub-architecture: HCS08
• Silicon Core Number: MC9S08
• Silicon Family Name: S08MP
• Kit Contents: Demo Board USB Cable DVD
• Rohs Compliant: Yes
• Tool Type: Demonstration Board
• Cpu Core: HCS08
• Data Bus Width: 8 bit
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant

6.4.1
DEMO9S08MP16 User Manual
Visual Components
paused and the scale of the X and Y axes can be changed via a tool bar
located in the top right corner of the Serial Grapher Application.
All data to be displayed must be in hexadecimal format. The data can be
accepted and displayed either as incoming byte values ($00-$FF) or word
values ($0000-$FFFF). The data format indicates whether the data is byte or
word data. The graphical components automatically size their range
depending upon the incoming data.
This PC-based application is included on the DVD-ROM that accompanies
the DEMO9S08MP16 and may also be found at:
http://www.pemicro.com/fixedlinks/demotoolkit.cfm.
The Bar Graph has four separate bars A, B, C, and D. On each bar a
percentage value is displayed which indicates the current value relative to the
full range. A byte value of $7F (max is $FF) would show up as approximately
50% as would a word value of $7FFF (max is $FFFF). As can be seen in the
data formatting section, all four bars must be written at the same time. The
bars are shown here:
17