DEMO9S08MP16 Freescale Semiconductor, DEMO9S08MP16 Datasheet - Page 35

• Manufacturer Part Number: DEMO9S08MP16
• Description: BOARD DEMO FOR MC9S08MP16
• Manufacturer: Freescale Semiconductor

Specifications of DEMO9S08MP16

• Main Purpose: Power Management, Motor Control
• Embedded: *
• Utilized Ic / Part: MC9S08MP16
• Primary Attributes: *
• Secondary Attributes: *
• Processor To Be Evaluated: MC9S08MP16
• Interface Type: RS232, USB
• Operating Supply Voltage: 6 V
• Silicon Manufacturer: Freescale
• Core Architecture: HCS08
• Core Sub-architecture: HCS08
• Silicon Core Number: MC9S08
• Silicon Family Name: S08MP
• Kit Contents: Demo Board USB Cable DVD
• Rohs Compliant: Yes
• Tool Type: Demonstration Board
• Cpu Core: HCS08
• Data Bus Width: 8 bit
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant

10.2
DEMO9S08MP16 User Manual
CodeWarrior Installation Fails (WinDriver Error)
(B) Re-Install the USB driver
If the Multilink device does not show up in the device manager, use the driver
installation utility located in the DEMO9S08MP16 Resources on the DVD-
ROM. After driver installation, unplug the DEMO9S08MP16 from the PC and
reboot the PC. When the reboot has completed, connect the interface to the
PC with the USB 2.0 cable. Run the software again to see if the interface is
now detected.
If you have an error attempting to install the drivers, please view the
installation troubleshooting FAQ on P&E’s website at:
http://www.pemicro.com/faqs/faq_view.cfm?id=89.
(C) Test for installation of the USB driver files
To test the driver installation, use the driver test utility in the DEMO9S08MP16
Resources of the DVD-ROM to make sure all files were properly installed.
This may give some indication of what the problem is.
(D) Using a USB Hub
The DEMO9S08MP16 is a high-power USB device. If a USB Hub is used, it
must be a self-powered hub (i.e., with its own power supply). If the Hub is not
self-powered the DEMO9S08MP16 will not work. In general, USB ports
located directly on the PC are high-power (self-powered) ports.
Q: When I try to install the Codewarrior or P&E software, installation fails with
this message: “There are currently 2 open applications using WinDriver.
Please close all applications and press Retry. To reload WinDriver, press
Cancel and reboot.” How do I solve this?
A: Some software applications on your PC are connected to the WinDriver
system driver which manages P&E's USB connections. This system driver
needs to be disabled for the installation to continue. Directions to disable
Windriver are as follows:
In Windows Explorer, right-click on My Computer and select Properties from
the drop-down menu.
5. The "P&E Multilink" device will be shown with an exclamation mark
6. Click the "Reinstall Driver…" button and follow the dialog instructions
next to it. Double-click this device.
to have Windows automatically install the driver.
31