P0305 Terasic Technologies Inc, P0305 Datasheet - Page 20

• Manufacturer Part Number: P0305
• Description: KIT MAX II MICRO
• Manufacturer: Terasic Technologies Inc
• Series: MAX® IIr
• Type: FPGAr

Specifications of P0305

• Contents: Evaluation Board, Cable(s), Software and Documentation
• For Use With/related Products: EPM2210F324
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant

This chapter demonstrates several reference designs to help users to understand how to implement
their own designs using the MAX II Micro board.
4.1
As mentioned in section 1.2, the MAX II Micro board can be connected to the PC either through the
USB cable provided in the package or through the USB slots directly.
4.2
The MAX II Micro board stores configuration data in the MAX II CPLD. User can reprogram the
CPLD any time using Quartus II software via the USB connection.
C onfiguring the CPLD in JTAG Mode
U
Figure 4.1 shows the switch configuration for JTAG mode. Set the Switch1 to UP position and
Switch 2 to DOWN position. To download a configuration bit stream into the CPLD, perform the
following steps:
D emonstration Setup
1 5 B
C onfiguring the MAX II CPLD on MAX II Micro Board
1 6 B
Ensure that power is supplied to the MAX II Micro board by connecting it to a USB port, as
shown in Figure 1.2 or Figure 1.3.
The CPLD can now be programmed by using the Quartus II Programmer module. Select a
configuration bit stream file with the .pof filename extension.
Once the download is finished, you should power off and on the MAX II Micro board to
activate the bitstream by disconnecting the board from you PC.
MAX II Micro Board Design
Demonstrations
Chapter 4
18
MMK User Manual