C8051T600DK Silicon Laboratories Inc, C8051T600DK Datasheet - Page 95

• Manufacturer Part Number: C8051T600DK
• Description: KIT DEV FOR C8051T60X MCU'S
• Manufacturer: Silicon Laboratories Inc
• Type: MCUr

Specifications of C8051T600DK

• Contents: Evaluation Board, Power Supply, USB Cables, Adapter and Documentation
• Processor To Be Evaluated: C8051T60x
• Interface Type: USB
• Lead Free Status / RoHS Status: Contains lead / RoHS non-compliant
• For Use With/related Products: C8051T600, C8051T601, C8051T602, C8051T603, C8051T604, C8051T605
• Lead Free Status / Rohs Status: Lead free / RoHS Compliant
• Other names: 336-1404

19.7. EPROM Error Reset
If an EPROM read or write targets an illegal address, a system reset is generated. This may occur due to
any of the following:



The MEMERR bit (RSTSRC.6) is set following an EPROM error reset. The state of the RST pin is unaf-
fected by this reset.
19.8. Software Reset
Software may force a reset by writing a 1 to the SWRSF bit (RSTSRC.4). The SWRSF bit will read 1 fol-
lowing a software forced reset. The state of the RST pin is unaffected by this reset.
Programming hardware attempts to write or read an EPROM location which is above the user code
space address limit.
An EPROM read from firmware is attempted above user code space. This occurs when a MOVC
operation is attempted above the user code space address limit.
A Program read is attempted above user code space. This occurs when user code attempts to branch
to an address above the user code space address limit.
Rev. 1.2
C8051T600/1/2/3/4/5/6
95