DC-EM-KT Digi International, DC-EM-KT Datasheet - Page 129

• Manufacturer Part Number: DC-EM-KT
• Description: KIT INTEGRATION EM FOR S MODELS
• Manufacturer: Digi International
• Series: Digi Connect EM®r
• Type: MCU Moduler

Specifications of DC-EM-KT

• Contents: Module with plug-and-play firmware, Development Board, Documentation, CD, Cables and Power Supply
• For Use With/related Products: Digi Connect EM S Module
• Lead Free Status / RoHS Status: Contains lead / RoHS non-compliant
• Other names: 602-1003; DC-EM-01T-KT; DC-EM-02T-KT

Administration from the Command-Line Interface
Administration of Digi Connect devices can also be performed from the command line.
The following table summarizes device-administration tasks and the commands used to
perform them. For descriptions of these commands, see the Digi Connect Family
Command Reference.
Backup/restore a configuration from a
TFTP server on the network
Update firmware
Reset configuration to factory defaults
Display system information and statistics
Reboot the device
Administrative Task
A d m i n i s t e r i n g D i g i C o n n e c t D e v i c e s
backup
boot
1
2
3
revert
or
boot action=factory
info
boot
Command
Telnet to the device server's
command line interface using a
telnet application or hyperterm.
If security is enabled for the device, a
login prompt is displayed. If you do not
know the user name and password,
contact the system administrator who
initially set up the device.
Issue the command:
#> boot load=<tftp-server-
ip>:<filename.bin>
where <tftp-server-ip> is the IP address of
the TFTP server that contains the
firmware and where <filename.bin> is the
name of the filename to upload.
1 2 9