DC-EM-KT Digi International, DC-EM-KT Datasheet - Page 97

• Manufacturer Part Number: DC-EM-KT
• Description: KIT INTEGRATION EM FOR S MODELS
• Manufacturer: Digi International
• Series: Digi Connect EM®r
• Type: MCU Moduler

Specifications of DC-EM-KT

• Contents: Module with plug-and-play firmware, Development Board, Documentation, CD, Cables and Power Supply
• For Use With/related Products: Digi Connect EM S Module
• Lead Free Status / RoHS Status: Contains lead / RoHS non-compliant
• Other names: 602-1003; DC-EM-01T-KT; DC-EM-02T-KT

Configure System Settings
Advanced
The default settings usually work for most situations, however you can fine tune the
connection between the Connectware server and the device. Be sure to try the default
settings before altering the advanced settings. The settings allow you adjust the setting
intervals for HTTP and TCP keep-alive, receive and transmit intervals, and interval for
connection lost.
Configuring system settings is done on the System Configuration page. On this page, you
can:
Configure Device Description Information
A device description is a system description of the device’s name, contact, and location.
This device description can be useful for identifying a specific device when you are
working with a large number of devices in multiple locations.
Configure SNMP
Simple Network Management Protocol (SNMP) is a protocol that can be used to manage
and monitor network devices. You can configure your Digi Connect device to use SNMP
features, or disable its use entirely for security reasons. To configure SNMP settings, click
the Simple Network Management Protocol link at the bottom of the System Configuration
page. SNMP settings include:
Additional encryption choices include: Generate device encryption key from
the following master encryption key and Use the following device encryption
key are both administrator defined.
Configure device description information, including the device name, contact,
and location.
Configure SNMP, including whether SNMP is enabled or disabled, and the
types of SNMP traps to be enabled.
Enable Simple Network Management Protocol (SNMP): This checkbox
enables or disables use of SNMP.
C o n f i g u r i n g t h e D i g i C o n n e c t D e v i c e s
9 7