DC-EM-KT Digi International, DC-EM-KT Datasheet - Page 66

• Manufacturer Part Number: DC-EM-KT
• Description: KIT INTEGRATION EM FOR S MODELS
• Manufacturer: Digi International
• Series: Digi Connect EM®r
• Type: MCU Moduler

Specifications of DC-EM-KT

• Contents: Module with plug-and-play firmware, Development Board, Documentation, CD, Cables and Power Supply
• For Use With/related Products: Digi Connect EM S Module
• Lead Free Status / RoHS Status: Contains lead / RoHS non-compliant
• Other names: 602-1003; DC-EM-01T-KT; DC-EM-02T-KT

6 6
Configure with an Access Point - Infrastructure Mode
1
2
3
Configure without an Access Point - Laptop with a Wireless Card Ad-Hoc Mode
1
2
3
Command Line Access
1
2
3
4
5
6
7
Configure your network using an access point with the SSID - Connect and all
encryption disabled (such as WEP & WPA).
Power up the device.
Launch the Discovery program and proceed with the configuration.
Configure the wireless card to operate in Ad-Hoc mode with the SSID - Connect.
Power up the device.
Launch the Discovery application on the laptop and proceed with the configuration.
Connect the Digi Connect Wi-SP to a PC with a serial cable.
Set the Digi Connect Wi-SP DIP switches in the On or up position.
Access a terminal emulation program such as HyperTerm
Select COM1 and click OK
Set the port settings to 9600, 8, None, 1, None (default settings) click Apply then
OK.
Enter the login username - root
and the default password -dbps
Go to the Digi Connect Family Command Reference on the enclosed CD for the
command descriptions. See the set wlan command for all parameters.
Start > Accessories > Communication > Hyperterm and enter a name for
the connection.
D i g i C o n n e c t F a m i l y U s e r ’ s G u i d e
1 2 3 4
ON
for both the Digi Connect Wi-SP and the Digi Connect SP.
DIP Switch settings for Command Line access