YRDKSH7216 Renesas Electronics America, YRDKSH7216 Datasheet - Page 16

• Manufacturer Part Number: YRDKSH7216
• Description: BOARD DEVELOPMENT FOR SH7216
• Manufacturer: Renesas Electronics America
• Type: MCUr

Specifications of YRDKSH7216

• Design Resources: RDK for SH7216 Schematics
• Contents: Board, Cable, Documentation, Power Supply
• For Use With/related Products: SH7216
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant

Note: The potentiometer is fitted to offer an easy way of supplying a variable analogue input to the controller. It does not
necessarily reflect the accuracy of the controllers ADC. Please see the device manual for details.
6.7. Serial port
The Serial module allows the MCU communication to a Host PC through the RS-232 connector, J5 using RS232Rx and
RS232Tx. The serial port is configured in DCE mode allowing direct connection to a PC without a Null modem. The
serial module can also be used as a serial debug port. To select between these two inputs, the jumpers JP1 and JP2
must be set appropriately (see the table of jumper settings in section 6.9). Table 6-4 contains details of the specific pin
functions and their locations.
6.8. RCAN (Not loaded)
The RCAN module can be controlled by the MCU through the CTx0 (Port pin PA1) and CRx0 (Port pin PA0) lines, or
controlled externally through the header connections CTx0 and CRx0. To select between these two inputs, the jumpers
JP4 and JP5 must be set appropriately (see the table of jumper settings in section 6.9). The Table 6-5 contains details
of the specific pin functions and their locations.
6.9. USB
The USB function module can be used for USB communication with host.
Table 6-6 contains details of the signal descriptions and pin connections.
Description
Description
RXD1
TXD1
CRx0
CTx0
RCAN Transmission Pin
Serial Transmission Pin
RCAN Reception Pin
Serial Reception Pin
Function
Function
Table 6-5: RCAN port pin details
Table 6-4: Serial port pin details
12
158 (Not Connected)
157 (Not Connected)
MCU Pin
MCU Pin
10
11
Not Connected
Header Pin
JN1, Pin 16
Header Pin
JN6, Pin 5
JN6, Pin 6