190-2255 Bluetechnix, 190-2255 Datasheet - Page 29

• Manufacturer Part Number: 190-2255
• Description: EMULATOR GNICE JTAG UCLINUX
• Manufacturer: Bluetechnix
• Series: gnICEr
• Type: In-Circuit Emulatorr

Specifications of 190-2255

• Contents: Emulation Module
• For Use With/related Products: Blackfin® Processors
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Other names: 190-2253; 190-2253

(Note that SCSI disk support is required for USB Mass Storage Support.)
USB Host Example: To attach a USB mass storage device, connect Jumper JP3 of your
Eval/Dev‐BF5xx >=V5.1 board to provide VBUS voltage. Boot uClinux, and load the following
modules:
Then connect the device to USB. The kernel detects the new USB device and creates a new
device file in the /dev/ directory. To mount the first partition of the device with VFAT file
system, type
USB Device example: To enable Ethernet over USB, remove jumper JP3. In the kernel
configuration, set the driver mode to device mode:
Device Drivers
Compile and boot uClinux. Then load the following modules:
Then connect the USB plug of the Eval/Dev‐BF5xx to a Linux PC. In the output of the
command, you see the Ethernet device
Blackfin uClinux User Guide
modprobe usbcore
modprobe musb_hdrc
modprobe usb-storage
mount –t vfat /dev/sdb1 /mnt
[*] USB support
modprobe musb_hdrc
modprobe g_ether
usb0:
Device, 4a:c4:12:9e:87:99
usbcore: registered new interface driver cdc_ether
<M>
<M>
<M>
USB Peripheral (gadget stack)
register
--->
USB Peripheral Controller
Driver Mode --->
USB Gadget Support
USB Gadget Support
Inventra Highspeed Dual Role Controller (TI, ADI, ...)
Ethernet Gadget (with CDC Ethernet support)
--->
'cdc_ether'
Inventra HDRC USB Peripheral (TI, ADI, ...)
USB Peripheral Controller --->
Inventra HDRC USB Peripheral (TI, ADI, ...)
usb0
be generated:
at
maximum performance at minimum size
--->
--->
usb-0000:00:10.4-8,
Tinyboards
CDC
Ethernet
Page 29
dmesg