HS7705KCM01H Renesas Electronics America, HS7705KCM01H Datasheet - Page 44

• Manufacturer Part Number: HS7705KCM01H
• Description: ON CHIP DEBUG EMULATOR
• Manufacturer: Renesas Electronics America

Specifications of HS7705KCM01H

• Lead Free Status / RoHS Status: Contains lead / RoHS non-compliant

7. The HDI window is displayed, and the dialog box is displayed as shown in figure 2.9.
8. Power on the user system.
9. Input the reset signal from the user system, and click the [OK] button.
10. When "Link Up" is displayed on the status bar, the HDI initiation is completed.
Notes: 1. When the HDI is not linked up even if the above procedure has been executed, the
18
2. If the user system interface cable is disconnected to the Hitachi-UDI port
driver will not be set correctly. Install drivers provided under the /DRIVERS
directory in the CD-R according to the screen instructions. For instructions on
how to check the driver has been correctly set, refer to the OS manual for your
host computer or the following URL:
http://www.hitachi.co.jp/Sicd/English/Products/micom/dev_env/tool/eml/e10a/
she10aqa.htm
connector on the user system during user program execution, the following dialog
box will be displayed.
Figure 2.9 Dialog Box of the RESET Signal Input Request Message
Figure 2.11 [JTAG Connector Disconnected] Dialog Box
Figure 2.10 [HDI] Status Bar