HS7750KCI01H Renesas Electronics America, HS7750KCI01H Datasheet - Page 23

• Manufacturer Part Number: HS7750KCI01H
• Description: ON CHIP DEBUG EMULATOR
• Manufacturer: Renesas Electronics America

Specifications of HS7750KCI01H

• Lead Free Status / RoHS Status: Contains lead / RoHS non-compliant

2. Notes on Setting the [Trace Acquisition] Window
(3) When MMU settings are modified or when a user program is changed between GO
(4) If a completion-type exception occurs during exception branch acquisition, the next address
(5) When a user interrupt is enabled by the INTERRUPT command during the emulator
(1) When the [Acquire continuous trace] check box is selected, do not perform memory access
(2) When internal I/O trace or LDTLB instruction trace is performed, select the [Acquire
(3) When the [Acquire continuous trace] check box is selected, 32 trace information data can
(4) Trace information cannot be acquired for the following branch instructions:
(5) When the [Acquire continuous trace] check box is selected, and when either the [Get trace
After a TLB error, trace acquisition cannot be performed.
command completion and trace display, the displayed mnemonics or operand may not be
correct.
to the address in which an exception occurs is acquired.
command wait state or user program execution, an interrupt that is generated at the
program execution start or end, including a step operation, can be traced in realtime.
during emulation.
continuous trace] check box.
be acquired. In this case, however, since the user program stops at constant intervals, the
processing speed is decreased compared with the case where the [Acquire continuous trace]
check box is not selected.
information of internal I/O area] radio button (internal I/O trace enabled) or the [Get trace
information of LDTLB instruction] radio button is selected (LDTLB instruction trace
enabled) with the [Break Condition 5] dialog box,
The BF and BT instructions whose displacement value is 0
Branch to H'A0000000 by reset
An internal I/O trace cannot be made with the Step In command.
The LDTLB instruction and internal I/O trace cannot be performed with the Step Over
command.
Figure 2.2 Message Box for Clearing a TLB Error
15