HS7750KCI01H Renesas Electronics America, HS7750KCI01H Datasheet - Page 33

• Manufacturer Part Number: HS7750KCI01H
• Description: ON CHIP DEBUG EMULATOR
• Manufacturer: Renesas Electronics America

Specifications of HS7750KCI01H

• Lead Free Status / RoHS Status: Contains lead / RoHS non-compliant

3. Initializing the measured result
2.2.9
While the profile function is being used, in addition to the description in section 5.19.12 in the
Debugger Part of the SuperH
cannot be used.
1. Continuous trace function
2. Internal trace function
3. Halt function
2.2.10
During emulation, any interrupt to the SH7750 or SH7750S can be used. Whether or not to
process interrupts during emulator command execution or in command input wait state can be
specified.
To initialize the measured result, select [Initialize] from the popup menu in the [Performance
Analysis] window or specify INIT with the PERFORMANCE_ANALYSIS command.
When the profile function is enabled, do not use the continuous trace function that can be used
in the internal trace function. The profile data cannot be measured correctly.
When the profile function is enabled, mode selection of the internal trace is disabled since all
items of the internal trace modes are selected in the emulator.
When the profile function is enabled, do not use the halt function for the internal or AUD
trace.
When no interrupt is processed during user program execution or in command input wait
state
While the emulator is executing the user program or is in command input wait state,
interrupts are not processed generally. However, if an internal interrupt or an edge
sensitive external interrupt occurs in command input wait state, the emulator holds the
interrupt and executes the interrupt processing routine when the GO command is entered.
When interrupts are processed during user program execution or in command input wait
state
To process NMIs and peripheral module interrupts during emulator command execution
and in command input wait state, use the INTERRUPT command. Input the INTERRUPT
command into the command line window.
Note on Using the Profile Function
Interrupts
To process only NMIs
Specify "nonmask" in the <interrupt_enable> option of the INTERRUPT command.
TM
Family E10A Emulator User’s Manual, the following functions
25