HS7760KCI02H Renesas Electronics America, HS7760KCI02H Datasheet - Page 267

• Manufacturer Part Number: HS7760KCI02H
• Description: ON CHIP DEBUG EMULATOR W/TRACE
• Manufacturer: Renesas Electronics America

Specifications of HS7760KCI02H

• Lead Free Status / RoHS Status: Contains lead / RoHS non-compliant

7.2
The following command supports the enable/disable function during user program break:
7.2.1
Description:
Sets or displays interrupt conditions during user program break.
Format:
Displays interrupt conditions.
ir
Sets interrupt conditions.
ir <interrupt_enable> [<imask>]
<imask> = imask <imask>
Table 7.6 INTERRUPT Command Parameter
Parameter
<interrupt_enable>
<imask>
Notes: 1. When the continuous trace mode has been selected, a user interrupt cannot be
Command: INTERRUPT (IR)
2. When <imask> is omitted, H’0 is set. All external interrupts are accepted.
Interrupt Enable/Disable Function During User Program Break
INTERRUPT Command: IR
accepted during emulator command execution or in the command wait state.
Type
Keyword
Numerical value
Description
Specifies acceptability of nonmaskable, external
hardware, and peripheral module interrupts.
disable : Does not accept nonmaskable, external
hardware, or peripheral module interrupts.
enable : Accepts only nonmaskable interrupts.
Enables acceptance of external hardware and
peripheral module interrupts and sets the interrupt
mask level. An interrupt with a lower level than the
set value is masked, and with a higher level than the
set value is accepted. Values H’0 to H’FF are
specified.
241