DK-PCI-2C35N Altera, DK-PCI-2C35N Datasheet - Page 26

• Manufacturer Part Number: DK-PCI-2C35N
• Description: PCI KIT W/CYCLONE II EP2C35N
• Manufacturer: Altera
• Series: Cyclone® IIr
• Type: FPGA: PCI Development Kitr

Specifications of DK-PCI-2C35N

• Contents: Dev Board, Quartus®II Web Edition, Cables, Accessories, Reference Designs and Demos
• For Use With/related Products: Cyclone ll 2C35N
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Other names: 544-1733

Programming the EPCS64 Serial Flash
Programming
the EPCS64
Serial Flash
2–16
PCI Development Kit, Cyclone II Edition Getting Started User Guide
f
To configure the Cyclone II device using the Quartus II software and the
USB-Blaster cable, perform the following steps:
1.
2.
3.
4.
5.
1
If the configuration is successful, the CONF_DONE LED (D10)
illuminates.
For information on how to use the USB-Blaster cable, refer to:
■
■
You can program the EPCS64 device in one of two ways:
■
■
Attach the USB-Blaster cable to the J8 header.
1
Open the Quartus II SRAM Object File (.sof) that you want to load
into the device. This step launches the Quartus II Programmer.
Select USB-Blaster as the hardware. For instructions, search for
Changing the Hardware Setup in Quartus II Help.
Set the mode to JTAG.
Click Start.
USB-Blaster Download Cable User Guide
Quartus II Help
In active serial mode
Using the Serial FlashLoader (SFL)
If the board is installed into a computer’s PCI slot when it is
configured by the USB-Blaster
could lock up. If this happens, reset the computer. Do not shut
down the computer or the configuration will be lost. Restart the
computer to re-enumerate the PCI bus.
Core Version a.b.c variable
The board has two connectors that can accept the
USB-Blaster cable for this operation. You must use the
connector on the PCI bracket next to the Ethernet and
RS-232 connectors.
™
cable, the computer system
Altera Corporation
May 2005