1213563-1 Tyco Electronics, 1213563-1 Datasheet - Page 4

• Manufacturer Part Number: 1213563-1
• Description: TOOL DAHT ADAPTER ASSEMBLY
• Manufacturer: Tyco Electronics

Specifications of 1213563-1

• Connector Type: DAHT Adaptor
• Lead Free Status / RoHS Status: Not applicable / Not applicable
• Crimp Handle: -
• Crimp Or Cable Size: -
• Lead Free Status / Rohs Status: Lead free / RoHS Compliant

6.2. Periodic Inspection
Regular inspections should be performed by
quality–control personnel. A record of scheduled
inspections should remain with the adapter or be
supplied to supervisory personnel responsible for the
for the adapter. Though recommendations call for at
least one inspection a month, the frequency should
be based on amount of use, working conditions,
operator training and skill, and your established
company policies. These inspections should include
the following:
}
4 of 5
DAHT Adapter Assembly 1213563-1
Trademark of Dow Corning Corporation
3. Make certain all surfaces are protected with a
thin coat of any good SAE 20 motor oil. DO NOT
oil excessively.
4. When the adapter assembly is not in use, store
it in a clean, dry area.
1. Remove all lubrication and accumulated film by
immersing the adapter in a suitable commercial
degreaser that will not affect paint or plastic.
2. Make certain all components are in place. If
replacements are necessary, refer to Section 7,
REPLACEMENT AND REPAIR.
3. Check all bearing surfaces for wear. Replace
worn parts.
Tyco Electronics Corporation
6.3. Lubrication
Lubricate all pins, pivot points, and bearing surfaces
with a high quality grease. Tyco Electronics
recommends the use of Molykote
commercially available lubricant. Lubricate according
to the following schedule:
7. REPLACEMENT AND REPAIR
Replacement parts and recommended spares are
listed in Figure 4. The recommended spares should
be stocked for immediate replacement. Replacement
parts can be ordered from, or when repair is
necessary, return adapter (along with a written
description of the problem) to:
For further repair and replacement information, call
the Tooling Assistance Center at 1–800–722–1111.
8. REVISION SUMMARY
Adapter used in daily production—lubricate daily
Adapter used daily (occasional)—lubricate weekly
Adapter used weekly—lubricate monthly
CUSTOMER SERVICE (38–35)
TYCO ELECTRONICS
P.O. BOX 3608
HARRISBURG, PA 17105–3608
S Updated document to corporate requirements
S Changed text in first DANGER in Section 5
}
paste, which is a
408-4485
Rev A