68081 Tyco Electronics, 68081 Datasheet - Page 8

• Manufacturer Part Number: 68081
• Description: PNEU HEAD COPALUM 8-1/0AWG
• Manufacturer: Tyco Electronics

Specifications of 68081

• Lead Free Status / RoHS Status: Not applicable / Not applicable

D
8
Insulation Piercing COPALUM Terminal and Splice Crimping Heads
If locators are worn and need replacement, order parts from this area of table.
7. To meet the NO–GO gage conditions, jaw
bottoming surfaces will NOT bottom, and NO–GO
gage member will be held stationary (will not
rotate) by the dies. See Figure 9, Detail B.
8. Inspect the right and left outer crimp closures in
the same manner as steps (2) thru (7). See Figure
9, Details C and D.
9. If both the inner crimp and the outer crimp
closures meet the GO NO–GO gage conditions,
the die closures may be considered dimensionally
correct. If you find that the die closures do not
conform with the GO NO–GO gage conditions,
contact your local Tyco Electronics Representative.
ITEM
ITEM
D
DESCRIPTION
DESCRIPTION
Figure 10
QTY
QTY
4.5. Replacement Parts
It may be advantageous to stock certain replaceable
parts to prevent loss of production time. Figure 10
lists the customer replaceable parts that can be
purchased from Tyco Electronics. Order
replacements through your Tyco Electronics
Representative, or call 1–800–526–5142, or send a
facsimile of your purchase order to 717–986–7605, or
write to:
CUSTOMER SERVICE (038–035)
TYCO ELECTRONICS CORPORATION
P.O. BOX 3608
HARRISBURG, PA 17105–3608
5. REVISION SUMMARY
S Updated document to corporate requirements
S New format
68081
TOOL NUMBERS
68082
408-2433
A