PIC18F27J53-I/SP Microchip Technology, PIC18F27J53-I/SP Datasheet - Page 215

• Manufacturer Part Number: PIC18F27J53-I/SP
• Description: IC PIC MCU 128KB FLASH 28SPDIP
• Manufacturer: Microchip Technology
• Series: PIC® XLP™ 18Fr

Specifications of PIC18F27J53-I/SP

• Program Memory Type: FLASH
• Program Memory Size: 128KB (64K x 16)
• Package / Case: *
• Core Processor: PIC
• Core Size: 8-Bit
• Speed: 48MHz
• Connectivity: I²C, LIN, SPI, UART/USART, USB
• Peripherals: Brown-out Detect/Reset, POR, PWM, WDT
• Number Of I /o: 22
• Ram Size: 3.8K x 8
• Voltage - Supply (vcc/vdd): 2.15 V ~ 3.6 V
• Data Converters: A/D 10x10b/12b
• Oscillator Type: Internal
• Operating Temperature: -40°C ~ 85°C
• Processor Series: PIC18F
• Core: PIC
• Data Bus Width: 8 bit
• Data Ram Size: 3.8 KB
• Interface Type: I2C, SPI, USART
• Maximum Clock Frequency: 48 MHz
• Number Of Programmable I/os: 16
• Number Of Timers: 8
• Operating Supply Voltage: 2.15 V to 3.6 V
• Maximum Operating Temperature: + 85 C
• Mounting Style: Through Hole
• Minimum Operating Temperature: - 40 C
• Controller Family/series: PIC18
• Cpu Speed: 48MHz
• Embedded Interface Type: I2C, SPI, USART
• Digital Ic Case Style: DIP
• Supply Voltage Range: 1.8V To 5.5V
• Rohs Compliant: Yes
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Eeprom Size: -
• Lead Free Status / Rohs Status: Lead free / RoHS Compliant

13.7
If ECCP1 or ECCP2 is configured to use Timer1 and to
generate a Special Event Trigger in Compare mode
(CCPxM<3:0> = 1011), this signal will reset Timer3.
The trigger from ECCP2 will also start an A/D conver-
sion if the A/D module is enabled (see Section 19.3.4
“Special Event Trigger” for more information).
The module must be configured as either a timer or a
synchronous counter to take advantage of this feature.
When used this way, the CCPRxH:CCPRxL register
pair effectively becomes a period register for Timer1.
If Timer1 is running in Asynchronous Counter mode,
this Reset operation may not work.
In the event that a write to Timer1 coincides with a
Special Event Trigger, the write operation will take
precedence.
FIGURE 13-4:
 2010 Microchip Technology Inc.
Note:
TMR1GE
T1GPOL
T1GVAL
T1G_IN
Timer1
Resetting Timer1 Using the ECCP
Special Event Trigger
T1CKI
The Special Event Trigger from the
ECCPx module will not set the TMR1IF
interrupt flag bit (PIR1<0>).
TIMER1 GATE COUNT ENABLE MODE
N
Preliminary
N + 1
PIC18F47J53 FAMILY
13.8
The Timer1 can be configured to count freely or the count
can be enabled and disabled using the Timer1 gate
circuitry. This is also referred to as Timer1 gate count
enable.
The Timer1 gate can also be driven by multiple
selectable sources.
13.8.1
The Timer1 Gate Enable mode is enabled by setting
the TMR1GE bit of the T1GCON register. The polarity
of the Timer1 Gate Enable mode is configured using
the T1GPOL bit of the T1GCON register.
When Timer1 Gate Enable mode is enabled, Timer1
will increment on the rising edge of the Timer1 clock
source. When Timer1 Gate Enable mode is disabled,
no incrementing will occur and Timer1 will hold the
current count. See Figure 13-4 for timing details.
TABLE 13-3:
T1CLK




Timer1 Gate
N + 2
T1GPOL
TIMER1 GATE COUNT ENABLE
0
0
1
1
TIMER1 GATE ENABLE
SELECTIONS
T1G
0
1
0
1
N + 3
Counts
Holds Count
Holds Count
Counts
Timer1 Operation
DS39964B-page 215
N + 4