PIC18F27J53-I/SP Microchip Technology, PIC18F27J53-I/SP Datasheet - Page 284

• Manufacturer Part Number: PIC18F27J53-I/SP
• Description: IC PIC MCU 128KB FLASH 28SPDIP
• Manufacturer: Microchip Technology
• Series: PIC® XLP™ 18Fr

Specifications of PIC18F27J53-I/SP

• Program Memory Type: FLASH
• Program Memory Size: 128KB (64K x 16)
• Package / Case: *
• Core Processor: PIC
• Core Size: 8-Bit
• Speed: 48MHz
• Connectivity: I²C, LIN, SPI, UART/USART, USB
• Peripherals: Brown-out Detect/Reset, POR, PWM, WDT
• Number Of I /o: 22
• Ram Size: 3.8K x 8
• Voltage - Supply (vcc/vdd): 2.15 V ~ 3.6 V
• Data Converters: A/D 10x10b/12b
• Oscillator Type: Internal
• Operating Temperature: -40°C ~ 85°C
• Processor Series: PIC18F
• Core: PIC
• Data Bus Width: 8 bit
• Data Ram Size: 3.8 KB
• Interface Type: I2C, SPI, USART
• Maximum Clock Frequency: 48 MHz
• Number Of Programmable I/os: 16
• Number Of Timers: 8
• Operating Supply Voltage: 2.15 V to 3.6 V
• Maximum Operating Temperature: + 85 C
• Mounting Style: Through Hole
• Minimum Operating Temperature: - 40 C
• Controller Family/series: PIC18
• Cpu Speed: 48MHz
• Embedded Interface Type: I2C, SPI, USART
• Digital Ic Case Style: DIP
• Supply Voltage Range: 1.8V To 5.5V
• Rohs Compliant: Yes
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Eeprom Size: -
• Lead Free Status / Rohs Status: Lead free / RoHS Compliant

setting the PxRSEN bit (ECCPxDEL<7>).
PIC18F47J53 FAMILY
FIGURE 19-12:
19.4.5
The Enhanced PWM can be configured to automatically
restart the PWM signal once the auto-shutdown condi-
tion has been removed. Auto-restart is enabled by
If auto-restart is enabled, the ECCPxASE bit will
remain set as long as the auto-shutdown condition is
active. When the auto-shutdown condition is removed,
the ECCPxASE bit will be cleared via hardware and
normal operation will resume.
FIGURE 19-13:
DS39964B-page 284
Shutdown
Shutdown
ECCPxASE bit
PWM
ECCPxASE bit
PWM
AUTO-RESTART MODE
Activity
Activity
Event
Event
PWM Period
PWM AUTO-SHUTDOWN WITH FIRMWARE RESTART (PxRSEN = 0)
PWM AUTO-SHUTDOWN WITH AUTO-RESTART ENABLED (PxRSEN = 1)
PWM Period
Start of
Start of
Normal PWM
Normal PWM
Preliminary
PWM Period
Event Occurs
Event Occurs
PWM Period
Shutdown
Shutdown
The module will wait until the next PWM period begins,
however, before re-enabling the output pin. This behav-
ior allows the auto-shutdown with auto-restart features
to be used in applications based on the current mode
of PWM control.
Event Clears
Event Clears
Shutdown
Shutdown
ECCPxASE
Cleared by
Firmware
 2010 Microchip Technology Inc.
Resumes
Resumes
PWM
PWM