MC9S12E64CFUE Freescale Semiconductor, MC9S12E64CFUE Datasheet - Page 91

• Manufacturer Part Number: MC9S12E64CFUE
• Description: IC MCU 64K FLASH 25MHZ 80-QFP
• Manufacturer: Freescale Semiconductor
• Series: HCS12r

Specifications of MC9S12E64CFUE

• Core Processor: HCS12
• Core Size: 16-Bit
• Speed: 25MHz
• Connectivity: EBI/EMI, I²C, SCI, SPI
• Peripherals: POR, PWM, WDT
• Number Of I /o: 60
• Program Memory Size: 64KB (64K x 8)
• Program Memory Type: FLASH
• Ram Size: 4K x 8
• Voltage - Supply (vcc/vdd): 2.35 V ~ 2.75 V
• Data Converters: A/D 16x10b; D/A 2x8b
• Oscillator Type: Internal
• Operating Temperature: -40°C ~ 85°C
• Package / Case: 80-QFP
• Package: 80PQFP
• Family Name: HCS12
• Maximum Speed: 25 MHz
• Operating Supply Voltage: 2.5|3.3|5 V
• Data Bus Width: 16 Bit
• Number Of Programmable I/os: 60
• Interface Type: SCI/SPI
• On-chip Adc: 16-chx10-bit
• On-chip Dac: 2-chx8-bit
• Number Of Timers: 12
• Processor Series: S12E
• Core: HCS12
• Data Ram Size: 4 KB
• Maximum Clock Frequency: 25 MHz
• Maximum Operating Temperature: + 85 C
• Mounting Style: SMD/SMT
• 3rd Party Development Tools: EWHCS12
• Minimum Operating Temperature: - 40 C
• Controller Family/series: HCS12/S12X
• No. Of I/o's: 58
• Ram Memory Size: 4KB
• Cpu Speed: 25MHz
• No. Of Timers: 4
• Embedded Interface Type: I2C, SCI, SPI
• Rohs Compliant: Yes
• For Use With: M68EVB912E128 - BOARD EVAL FOR MC9S12E128/64
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Eeprom Size: -
• Lead Free Status / Rohs Status: Lead free / RoHS Compliant

2.3.2.1
The FCLKDIV register is used to control timed events in program and erase algorithms.
All bits in the FCLKDIV register are readable, bits 6–0 are write once and bit 7 is not writable.
2.3.2.2
The FSEC register holds all bits associated with the security of the MCU and Flash module.
All bits in the FSEC register are readable but not writable.
The FSEC register is loaded from the Flash configuration field at 0xFF0F during the reset sequence,
indicated by F in
Freescale Semiconductor
Module Base + 0x0000
Module Base + 0x0001
FDIV[5:0]
FDIVLD
PRDIV8
Reset
Reset
Field
5–0
7
6
W
W
R
R
KEYEN1
FDIVLD
Clock Divider Loaded
0 FCLKDIV register has not been written
1 FCLKDIV register has been written to since the last reset
Enable Prescalar by 8
0 The oscillator clock is directly fed into the Flash clock divider
1 The oscillator clock is divided by 8 before feeding into the Flash clock divider
Clock Divider Bits — The combination of PRDIV8 and FDIV[5:0] must divide the oscillator clock down to a
frequency of 150 kHz – 200 kHz. The maximum divide ratio is 512. Refer to
FCLKDIV Register”
Flash Clock Divider Register (FCLKDIV)
Flash Security Register (FSEC)
F
0
7
7
Figure
= Unimplemented or Reserved
= Unimplemented or Reserved
KEYEN0
PRDIV8
2-5.
0
F
6
6
Figure 2-4. Flash Clock Divider Register (FCLKDIV)
for more information.
Figure 2-5. Flash Security Register (FSEC)
Table 2-3. FCLKDIV Field Descriptions
FDIV5
NV5
MC9S12E128 Data Sheet, Rev. 1.07
0
F
5
5
FDIV4
NV4
0
F
4
4
Description
FDIV3
NV3
F
0
3
3
Chapter 2 128 Kbyte Flash Module (FTS128K1V1)
FDIV2
NV2
0
F
2
2
Section 2.4.1.1, “Writing the
FDIV1
SEC1
0
F
1
1
FDIV0
SEC0
F
0
0
0
91